Vertical Graphics Card Holder Kit V3

This is a very well made vertical mount. I have been keeping an eye to purchase for the past few years ever since I bought the 4090. I have my 4090 gaming oc on this mount. It did take a little time to figure out the steps in installing. I only have about one eigth of an inch going down on the right end of the mount. I mean for esthetics and better air flow is the main reason I did purchase it. It will also help with gpu sagging and buying a support bracket which I did back 2022, after knowing it was about five pounds. So is it worth it? In my use case scenarios it is , I went from an all black to rgb light. I even had the rgb lighting on the gpu off from 2022 but enough of that. I have this set up on a ANTEC PERFORMANCE 1 FT case and it fits really well. You can adjust the mount to move forward or backward, left and right. On the 3rd picture you will see a small section from the back that is about 2 slot for removing if you have a micro atx case, so it doesn't interfere with rear fan. That is also awesome for those that have that kind of pc case. If you have a dual cpu air cooler don't even think about it, as it will interfere with gpu mount kit. Almost a tool less design from Coolmaster. All you need is a regular phillips screwdriver for a screws to mount the first part just below the rear motherboard aio. The price was pretty fair for the vertical mount since it's release and the build quality is great. Edit: 7/26 The pcie 4.0 works great no regrets, and the diffrent color of gray could mean also pcie 5.0. I remember it used to be a purple color I still get the same fps as I did connected to the pcie slot. No issues with screen or games. Great job on both the support bracket and pcie cable.

Awesome mount to display your gpu showcasing that glorious fan shroud, quick easy installation, great build quality, and the ability to move the gpu closer to the mobo or glass side panel as well as from the front of the case to the back is a nice feature. Fits my 011 Evo beautifully, and the color matches the case perfectly. Overall a super functional great looking case mod!

The Cooler Master MasterAccessory Vertical GPU Card Holder Kit V3 White arrived with no delivery issues. The concept of a vertical GPU holder intrigued me, and I was initially excited to try it out. Installation was straightforward, but I encountered a significant issue: my graphics card didn't fit vertically with my CPU cooler. This rendered the holder unusable for my current setup. The holder seems to perform its primary function well, securely holding a GPU in place. However, it takes up all the I/O slots on the back of the case. Since I use M.2 storage, this wasn't an issue for me, but it could be a problem for those who need additional slots for other components. While the kit fits my case, the incompatibility with my graphics card and cooler was a dealbreaker. The design and build quality are solid, with a sturdy metal construction and a rigid cable. The Cooler Master logo cut out of the metal is a minor aesthetic downside but is ultimately covered by the graphics card. The price is reasonable, and for those who can make it work, it offers a stylish way to display a vertical graphics card. However, for me, it currently serves as an unused component. Overall, I'm somewhat indifferent to the product. It has potential, but due to compatibility issues, it’s just a paperweight in my setup. It might find use in the future, but for now, it remains unused.

I recently purchased the Cooler Master MasterAccessory Vertical GPU Card Holder Kit V3 in White, and I must say, it's an excellent product! The sleek design and durable construction really impressed me right out of the box. The white color perfectly matches my setup, adding a touch of sophistication to my gaming rig. However, I encountered a small issue when attempting to install it into my case. Unfortunately, it didn't quite fit as expected due to the dimensions of my case. Despite my best efforts, I couldn't find a workaround to make it fit properly. Apart from that, I couldn't be happier with the quality and functionality of the product. From what I see from other people build, it effectively showcases their GPU vertically, enhancing the aesthetics of their builds while also improving airflow. The installation process was straightforward, and the included accessories made it easy to customize all the GPU positions. Overall, I highly recommend the Cooler Master MasterAccessory Vertical GPU Card Holder Kit V3 to anyone looking to elevate their PC build. While I couldn't make it fit into my case, it's still an excellent addition to any setup and definitely deserving of five stars.

Picked this up for an NZXT case because at the time it was cheaper and had better reviews than the NZXT vertical GPU mount, had to dremel the case a little, specifically to remove 2 of the separators between the expansion slots, super easy mod to the case, no mod of the mount itself was necessary. Great fit, looks, good, temps were the same before and after installation so it doesn't seem like airflow was negatively impacted. All in all I think this was the right choice for my application

I wasn’t sure this mount would fit inside my Corsair 4000D Airflow, but it slid in perfectly and lined up without a single issue. The bracket feels solid and well-engineered — no flex, no sag, and it holds my ASUS GPU rock-steady. What really impressed me was the included riser cable — it’s much higher quality than I expected. The shielding, connectors, and flexibility are top-notch; it bends smoothly for routing but doesn’t feel flimsy or like it’s going to snap. Cooler Master clearly didn’t cheap out here. The spacing is just right for airflow, and the black finish matches the case perfectly. It honestly looks factory-installed once everything’s mounted. If you’re planning a vertical GPU setup in a Corsair 4000D, this is the bracket to get — no compromises, no headaches, just clean results. Did do a small mod to the PCIE brackets to get DP cable in but you can also just buy a angled or low profile dp cable or you can somewhat maneuver a regular dp cable in but it is a little difficult atleast it was for me in my case specially so I opted to cut one of pcie brackets off instead.

This was a good budget vertical GPU stand, however I just did not like it as much as others. The DP and HDMI will be deep inside once you install your graphics card into it, which makes it a bit hard to plug in and take out. Additionally, it sags with the larger GPUs, but its build quality is good, it is very adjustable, and depending on the case it will provide pretty good airflow.

I got this because my other card from another brand that said it was 4.0 didn't work with my 5.0 compatible Asrock Steel Legend 9070xt. It must have only been putting out 3.0 bandwidth. I got this one for the cable. Took a bit of work to get it to work with my case. The only negatives are that the cable is a bit stiff and there was an offset that didn't line up with the mb. The offset wasn't too bad though and isn't putting much pressure on the port so that's good. There was a very slight bend in the finished job tears the glass of my case but that could have been the existing metal on the case as I can't tell if it's the new bracket. A simple metal shim will fix it if I feel like fixing that lol. Now for all the positives! There is a grey section of the cable that perfectly lines up with the grey slash of color on my white steel legend card. Looks like they where made for each other. The build is very sturdy and well made. The price is very low and it's the best deal on here or anywhere else that I could find. I tested the card directly on the mb, and with the cable and this is what I found out. All the tests came in at 5.0 speed! 4.0 would have only been about 5 percent lower speed on this card but I wasn't expecting to get full bandwidth 5.0! Several testing programs confirmed it. Also the difference between the cable and directly into the mb and using the cable is only 0.22 FPS! This test was done before and after with Cyberpunk 2077 with ray tracing but at 2560x1440 resolution. It can be a lot more then that with any cable so that is extremely low bandwidth loss. I have found others on line that have had similar 5.0 results. Though cable bandwidth can vary between cables in a same brand, I hope this review helps with your decision to buy the card. Thank you for your time and happy gaming!