Trend Professional Bearing Guided Trimming Cutter, 1/4 Inch Shank, 12.7mm Cut Diameter, 25mm Cut, 1/2 Inch Bearing, Tungsten Carbide Tipped, T46/01X1/4TC

I bought this to route cavities on a custom electric guitar body and it worked perfectly. This bit gave a really clean result with no tear out.Being a novice DIY-er any having only used a router a few times before I was tempted to buy some cheap bits. But it really does seem like you get what you pay for - I would recommend spending a little more on one quality bit over half the price for a set of cheap bits!

I have used many types of router bits over the years and I've never had any problems with trend.Sharp, well made and balanced. No chatter or vibrations while in rotation. My newest trend bit is a 9.5mm dia bit for routing guitar backplate cavity recesses and I have had no problem with it . Would buy trend bits again

Good quality cutter and perfect for small template use. Was on offer when I bought it, so all good!

Thanks

Got to hang some doors and don’t like chiselling. Make up a jig 15mm thick and use one of these. Get the corner chisel from Trend and your away. Obvious set your router depth etc etc etc.

Perfect very sharp and accurate just the job

A little expensive but in this case you get what you pay for. I've recently had a need for clean, splinter free flush trimming of some hardwood edges. It performed flawlessly unlike some cheaper versions I had accumulated over the years.

Router cutters are one of those things where paying a little more for a better product does tend to pay dividends. I used this cutter to create some shallow rebates in hardwood using an 18mm MDF pattern. The quality of finish is faultless and it went through the timber like the proverbial hot knife through butter with no burning or other nasties.

All perfect as per quality the only problem it stayed in the last courier place for ten days . You have to make it better

Très bonne fraise

tutto okay

Je utilisé deux fois et cassé au milieu d'un emploi. la prochaine fois que je vais acheter quelque chose de moins cher, au moins, je ne me sens pas triché.

Nachdem ich mir fast einen Gitarrenbody versaut habe, ersteinmal die Madenschraube auf Maß abgeschliffen. Danach sauberes Arbeiten