Go RhinoCross Bars - Bed Rail Kit for Full/Mid Sized Trucks w/Tonneau Cover T-Tracks | Mild Steel, Textured Black | 5935015T | Fits Full & Mid Sized Trucks w/Tonneau Cover T-Tracks

I needed a way to carry my dog's crate OUTSIDE of the truck bed, but it is covered with a MountainTop Tonneau. This slots into the T-rails fairly easily and makes for a great way to store/carry things out of the way of the top without interrupting its operation.My only complaint is the fitting into the T-rail as it a bit finnicky to get the screws into a nut in the rail, and its not easy to move them along the rail once installed (have to loosen 4 bolts on each side.

These will start to rust immediately after install. Whoever coated these did an awful job with rust leeching through the coating.

Heavy duty, easy tobunstall

Installed on Retrax PRO XR tonneau cover (2024 RAM 2500 Rebel)The rack looks great and appears to be quite sturdy but installation/assembly presented quite a few issues:1. The provided 1/4-20 x 3/4 button head cap screws are a bit too long and bottom out in the t-slot channel on the Retrax tonneau cover. I can't say if this is an issue on all brands or just the Retrax. I replace all of the 3/4" long screws with 5/8". This made it a little more difficult to get the screw started but they don't dig in to the bottom of the t-slot channel.2. There was one 1/4" flat washer missing from the hardware package.3. The instructions are a bit vague and could use a bit more detail.4. The crossbar installation needs a redesign. Trying to install the washers and nuts from underneath is awkward at best. The is very little room to reach the bottom of the bolts and no room for a socket wrench on two of the three nuts. An offset wrench is needed for the middle nut on each riser.Be prepared to spend considerable more than the hour installation time claimed by the manufacturer and, as others have stated, expect a trip (or two) to the hardware store to pick up missing/wrong fasteners. All that being said, I really do like the look after getting it finished. There are some better options that are easier to install but they come at a considerably higher price.

An assortment of hex bolts and button hex drive screws is supplied with no instructions as to use which, when and where. Pictures show installation with hex bolts run from the bottom and nutted from the top. The hex heads under the mounting plate won't fit inside the groove of the tonneau track rail. So, making the assumpition,( no pictures, no instructions) the button head hex drive screws must be what's called for screwing them in from the top down. Two of the hex drives were over coated so couldn't get a bite on the set. I'd feel a lot better if the instruction ( and lack of any video instruction) would confirm this.

They are a little pricy, but I'm glad I went with a name brand. This thing is great! Easy to install and very solid material.

Meh