Illuminate Your Space with Style! 💡
The Bonlux 12W LED GX24Q 4-pin Base Light Bulb is a powerful and efficient replacement for traditional 26W CFL bulbs. With a color temperature of 6000K and a 360-degree beam angle, this LED lamp delivers bright, clear light while consuming only 12 watts. Designed for easy installation without a ballast, this 2-pack is perfect for enhancing indoor environments with energy-efficient lighting.
| Material Type | Plastic |
| Shape | Bulb |
| Item Weight | 0.18 Kilograms |
| Item Dimensions W x H | 35W x 160H Millimeters |
| Package Quantity | 2 |
| Colour Temperature | 6000 Kelvin |
| Controller Type | Push Button |
| Wattage | 12 Watts |
| Light Type | LED |
| Indoor Outdoor Usage | Indoor |
| Color Rendering Index | 80.00 |
| Additional Features | 26W CFL/Compact Fluorescent Replacement Bulb, 12W GX24Q/G24Q 4-pin LED PL Retrofit Lamp, No Ballast Required, make sure that you re-wire the fixture to bypass the ballast, Not Dimmable, Base depth: 0.59inches (15mm) |
| Control Method | App |
| Power Consumption | 12 Watts |
| Light Source Type | LED |
| Power Source Type | AC |
| Incandescent Equivalent Wattage | 26 Watts |
| Voltage | 120 Volts |
| Lumens | 1200 Lumen |
| Light Source Wattage | 12 Watts |
| Is Electric | Yes |
| White Brightness | 1200 Lumens |
| Specific Uses For Product | Lamp |
C**E
Fonctionne très bien clair et assez puissante ,
Pour une chambre de bain pas oublié d enlever le ballast
K**R
Less energy - much brighter.
A little work to rewire but worth it!
M**P
Ditch those flickering toxic florescent bulbs.
Easy to remove ballast and rewire, 5 minute job. New LED bulbs are INSTANT On and no flickering!
A**L
remove ballasts
first thought i could get away without pulling ballasts. once i did lights worked great!
C**O
READ THE INSTRUCTIONS!!! Single Star Reviews May Have Missed That Minor Detail.
After reading the worst reviews first, I almost passed these bulbs by. After reading further, it became perfectly clear that, for these LEDs bulbs to work correctly, to not blow up, not fizzle, snap, crackle, or pop, the fluorescent ballast in the fixture MUST BE BYPASSED or REMOVED. If one tries to simply swap, plug, and play, standby for an epic fail.My fixture had two bulbs, thus four red wires and four blue wires from the ballast. Removed the bulb enclosure, cut the wires as close to the ballast as possible to achieve maximum wire lengths, twisted them together, used a pair of (not supplied) wire nuts to join everything, put the enclosure back in the fixture, and VOILA...Houston, we have lights; bright 6000k lights. What a tremendous improvement over the former wimpy CFL bulbs.READ THE INSTRUCTIONS !!!!!!!!!!!(Please note the picture is very bright even though the camera was set at near minimum exposure. That's a good thing.)
Trustpilot
2 days ago
2 weeks ago