ABS 3D Printing Filament (Orange) | Print Temperature - 220-230°C | Infill Speed - 30~90mm/s | 3D Printing Material

EXCELLET FILAMENT , MAKE SURE UR HOTEND HAS PROPER COOLING , JAMMING IS NOT VERY MUCH . COLOUR SAME AS SHOWN (IN MY CASE METAL BLUE AND GOLD)

I am new to 3d Printing, I can tell you that this filament is economical for a beginner. I have printed few prints and they are satisfactory. Not as great as WOL 3D Filaments. There are webbing issues in the y axis when printing. The filament broken only one so far and I have kept it on the spool holder of the printer for more than 21 days and seems to be fine.I have wasted the this Filament as this doesn't function well with hardened steel nozzel. The prints are bad and wasted around 250gms of filament when using hardened steel nozzel. I tried keeping the nozzel temprature above 225 degrees but then there is an issue with warping and model sticking to the build plate.However this works fine with brass nozzel at 210-215 degree nozzel temp and adherence is good when used with Masking tape.The last image is 10x10mm test cube the prints at the top are smooth only due to ironing. This filament might not be a good fit for small prints

The media could not be loaded. The filament is very bad. The print had so many bulges and lines.The parts come out very brittle, most break while removing them from the printer.The bed adhesion is the only good thing with this. Wol3d works much better for me. Wont recommend this to anyone with bambu.

The 3Idea Technology PLA White Filament is a high-quality filament that is perfect for 3D printing. It has a dimensional accuracy of +/- 0.03mm, which means that you can expect consistent and precise prints every time.The filament is made from high-quality materials that ensure durability and reliability. It is also easy to use and works well with a wide range of 3D printers. The filament is compatible with 3D printers that support 1.75mm filament.The 1kg spool of filament is packaged in a vacuum-sealed bag with a desiccant to ensure that it stays dry and free from moisture. The spool is also easy to load onto your 3D printer, thanks to its design.Overall, the 3Idea Technology PLA White Filament is a great choice for anyone who is looking for high-quality filament for their 3D printer. It is easy to use, reliable, and produces consistent and precise prints.

Like others have stated, its main issue is inconsistency. Its stringy and doesnt matter how much you tweak the retraction, it deviates soon and you end up with a lot of stringy goop. I have had a few prints fail because of clogging and low bed adhesion as well. Bed adhesion can be improved via brim settings.end of the day, it is what you pay for. This is the cheapest filament out there, and will be good for prototypingUPDATE after using 1/4th the spool:First layer temp - 210CPrint temp - 205CFirst layer bed temp = 60Cprinting bed temp = 50CRetraction 8mmI used it on my ender 3, with a custom part cooler shroud. Part cooling is important for this filament as it is quite goopy.With these settings you will get decent prints, however the moisture in the filament causes issues with finish.i bought another similarly priced spool (elegant goop) *wink* and that filament is 100x better than this for a slightly higher price.

Good strength and compatibility with 3D Printers

Ugh, this filament is one of the worst I’ve used. The spool winding is terrible and keeps getting stuck. The color is way darker than shown (what was i expecting, they write Magenta as 'Majenta'), and prints have a lot of zits and bulges. Overhangs just don’t work right. Dimensional acuracy is just a joke. Only positives: bed adhesion is good and there’s minimal stringing. I’ve had way better luck with Wol3D and Nfil3D.Their "Quality" is certainly shown by their perfect Spool Logo.Stupid filament, wasted my money.

Great quality considering the price. Prints without any problem on the A1 Mini. Recommended to turn on the flow dynamic calibration of A1 mini for first few prints for better quality over time.