🔧 Upgrade Your Ride with Ease!
The TOMALL H1 LED Headlight Replacement Male Plug is designed for effortless installation of HID/LED kits in your vehicle. Made with high-quality silver-coated copper wire, it supports a wide voltage range of 12V-24V and accommodates power outputs from 10w to 110w. The compact 13 cm design ensures a clean look while maintaining functionality, making it an essential accessory for any car enthusiast.
Manufacturer | H1-Socket |
Brand | TOMALL |
Package Dimensions | 11 x 8 x 0.5 cm; 20 g |
Item model number | H1-Socket |
Manufacturer part number | H1-Socket |
Position | Front |
Voltage | 24 Volts |
Item Weight | 20 g |
A**R
Car bulb holder
Very good product ,made them fit my rear light Cluster for my peugeot RCZ very well made too
F**S
Works great
I needed to replace the bulb holders for the rear lights on my zx6r. Didn't fancy paying £30 for a new loom so I went with these. I needed to cut two of the lugs away to fit, after that great. Just double check the red/blue wires. I soldered them to my red and blue wires without checking first, and got my brake/main lights the wrong way round (my fault for not checking) so I had to swap them round
T**K
Works fine but tight fit
Works great but was a tight fit into my bulbs and required the yellow seal removed.
S**T
Perfect fit
After purchasing some led H1 bulbs I needed these to connect between the car wiring plugs and the back of the led bulbs.They fit nice and snug and seem to be good quality.
I**N
Not compatible with 9005 fittings
Great item however 9005 lamps have two polarity keys so this will not fit into a 9005 lamp.
A**R
Car
All good
K**U
Fit
Fit
H**D
Very good... If they have been made correctly at the factory
I used these to install H11 LED Switchback Fogs in my 2015 Nissan Pulsar, although the pulsar came with H11 plugs from the factory I had previously cut them off in order to install HIDs, since changing my mind and going back to LED's I needed new connectors, These fit the bill perfectly.These H11 connectors are great, but they have one drawback, quality control at the factory is lacking, when I took them out of the package and went to use my wire strippers on the wires I found that with the most gentle of tugs I could pull the wire off the plug connector, not a problem for me as I depinned all of the connectors and just soldered the wires back into the connectors as well as added solder to the other connectors to create a stronger bond between the wire and the connector, but for your average user who doesnt have a soldering iron its a problem and would require a replacement.If it wasnt for the fact that I had to do some unnecessary soldering these would get 5 stars all day long.
A**8
Portalampade per HIR2
Buon prodotto per la sostituzione di un portalampade fari anabbaglianti lampadine HIR2
J**O
El conector sirve para bombilla hir2
El conector está bien, lo que no está bien son los cables, son finos y de poca calidad, lo alambres de cobre se parten con mirarlos, estaría bien si el cable fuera de calidad, para lo que llevan de cable no estaría mal ponerlos de calidad, y sobre todo por el precio que tienen los dos conectores.
M**C
Très bonne qualité
J'avais déjà acheté sur un site chinois connu ce genre de douilles (visuellement identiques sauf la couleur qui était grise sur les anciennes). J'en avais été très déçu car lorsque vous roulez avec les feux allumés, la température de l'ampoule (pourtant modérée : 5 watts) suffisait à ramollir le plastique et faire fondre en ces douilles ce qui bloquait les ampoules soudées dedans mais surtout, qui éloignait les plots des contacts : plus de continuité : l'ampoule ne s'allumait plus.Mais avec ce modèle acheté sur Amazon (douilles de couleur rouge/brun), le plastique est de très bonne qualité et résiste parfaitement à la chaleur des ampoules. Je recommande donc à 100%
J**.
Super
Passt perfekt.
M**O
É o que é!
Era o que estava a procura e por um preço fantastico.Na Bosch Service queriam cobrar 112€ por umas iguais! 😂Obrigado ao vendedor!
Trustpilot
2 weeks ago
2 months ago