Gel-free CUE Touch Screen Display Replacement for 2013 2014 2015 2016 2017 2018-2020 Cadillac ATS SRX XTS CTS ESCALADE CUE Screen Replacement with Removal Tool Kit

As a non-mechanic, I was skeptical about being able to replace the screen in my 2015 Cadillac SRX. No worries. Took me less than 90 minutes, and by simply following steps from a few helpful YouTube videos, plus with the aid of the included tools, the job was a success. This product was worth every penny, was of high quality, and saved me many hundreds of dollars compared with having a Cadillac dealer do the screen replacement. I recommend laying each part , along with trays for screws, in a long line, so that when it comes time to reassemble, you simply start with the last part closest to you and move along to the first part. Check your parts alignment carefully, especially ially when reinstalling the back cover and case, as that is the key to having the Cue main unit function properly without any binding. The gold ribbon connector installation, with black clip, is a bit delicate. It’s easier to access the clip and insert the ribbon connector with the storage compartment door all the way up.

Arrived fast. Works perfectly. Easy to follow video instructions. All tools needed are suppied with screen. Took me lees that an hour to install including panel removal and reinstall. Would buy again. Replaced due to delamination causing screen to be unresponsive. 2 year warranty is a bonus. Cost effective repair. Would buy again.

Perfect!Read instructions several times, watch several videos first. Take your time, this is not a contest. I'm a retired professional mechanic and spent four hours start to finish. Break the process into four smaller steps, remove unit from car, disassemble unit and remove old touchscreen, install new touchscreen on unit, test for proper operation and response, then reassemble the remaining parts of the unit and re-install in car. The printed instructions are perfect, clear, highly detailed, use them. I used all manual tools, no power tools. A long12 inch #1 Phillips is a must have, along with a 7mm socket. Hint: install the new touchscreen center screws first loosely and work your way out, the screen will align on all the tabs then tighten all the screws evenly. Do this on a work bench not your lap in the car. Powered up with no problems at all. Exact fit and finish worthy of a Caddy!!!!

Awesome one has to be very meticulous in disassembling and removing items however I went on YouTube it took me about 2 hours but in the end perfect outcome my friend saved about $2500 that’s the price they gave he at the dealership

I went for this cheap fix before pulling the trigger on a CUE replacement or an aftermarket unit. I’m glad I did, worked like a charm and no difference between this and the one that came from the factory.

After purchasing the SRX we noticed a little webbing on the screen in the upper corners. After a few weeks at a mechanic(and in the heat) it was horrible after we picked the car back up. Just a tip: after you have replaced the housing and are ready to reinsert all the trim pieces it may be a good idea to leave the storage tray open! My husband got the Touch Bar wedged under the trim pieces. We had to take all the trim pieces off to open the door and retrieve his CD.

Quick delivery and easy install. All the tools you need included. The magnetic screwdriver was a nice touch.

I installed the screen and it worked perfectly. No problem whatsoever and it looks exactly like the original. The included tools are of good quality and were very useful. I know there are more expensive options for this screen but I suspect there is only one company manufacturing these. YouTube is your friend and you should be able to find a video for your specific vehicle model.