7440 ESD 0,3-1,2 Nm

I'm a former US Navy helicopter mechanic, but these days, I do long-distance bicycle touring. This screwdriver is one of two Wera torque screwdrivers I use to maintain and repair my and my wife's long-distance touring bicycles. This type of bicycling demands a bike that is exceptionally reliable. That means, not only must the bike be robust, it must also be properly set up with all bolts and screws properly torqued... not too tight, not too loose, not stripped out, and not crushing their associated components. This screwdriver lets me set the smalest screws & bolts on my bikes to within specification and that lets me ride with more confidence in remote areas because I know that such fasteners are less likely to come loose, less likely to be stripped, and less likely to crush the delicate components they're holding fast. I love my Wera screwdrivers, and I'll own a set for as long as I live.

Hallo ihr Lieben wieder etwas von Wera ich benutze denn Drehmoment Schraubendreher für das anziehen von Torx TX 15 Schrauben von Wendeschneide Platten an der Drehmaschine möchte auf der sicheren Seite sein da ich schon einen Wera Drehmoment Schaubendreher habe aber von 1,2 bis 3 Nm denn ich aber für die Große Drehmaschine brauche aber leider gab’s das Werkzeug nur in der SSD Ausführung auch OK außer der Farbe sind sie gleich Gebaut Werkzeug ist Top ! Funktioniert wunderbar man spürt das überspringen gut mit einem leichten knacken auch bei lautem Umgebungs Geräuschen spürt man das der Drehmoment erreicht ist perfekt für mich !

Onestamente una scatola di cartone faceva più figura con dentro il tubo di plastica che invece fa da contenitore. Il prodotto arriva con certificato di taratura che ovviamente dovrà essere rinnovato periodicamente perchè con il tempo il lubrificate secca e va sostituito e ritarato. Bello grosso , più di quanto immaginavo ma comodo ad alti serraggi. La versione più piccola con lente di plastica sulla scala costa circa il doppio e onestamente non capisco il perchè se no forse perchè è una novità. Ad ogni modo quello più piccolo è scomodo per serraggi superiore a 1.5 Nm ma sostituirebbe perfettamente il manico fornito nel kit KK 60 ESD rendendolo piu utile.

I do a lot of PC/server building and maintenance and having a torque screwdriver can prove handy when vendors provide a specific torque spec. This is an good option for a common range of torque values at a very reasonable price. I can't speak to the accuracy of the torque applied, but it's certainly better than "hand tight."

It works