GRAUGEAR 3.5 Inch Front Panel Hub, 4 Ports Internal Metal USB Hub, 2X USB-C 10Gbps and 2X USB 3.2 Gen 2 Ports, USB3.2 Type-E Key-A 20-Pin Header & 15-Pin SATA Power Connector Required [G-MP02]

I was upgrading my motherboard but re-using the old case. This was an easy way to add USB 3/2 ports to the front panel. The data cable plugged right into my motherboard. Installation was super easy--just placed it in an unused 3.5" bay, plugged in power and data cable, and good to go! No setup required.

Works great!

Build is metal rather than plastic and fits exactly into a floppy bay. I had purchased this unit before the motherboard I intended to install it on arrived and sent an email to Graugear support asking if it would plug into the mb (in my email to them I had sent a link for the mb that I would be using their USB panel). Within half a day a tech responded assuring me that it would work. Sure enough, it plugged in and worked perfectly.

Overall good but had to drill a little hole in order to attach it to the 5” adapter.

As soon as I installed this hub my Win11 PC refuses to sleep or hibernate. If I force sleep or hibernation, the PC will get to the point where the power shuts off; but then immediately the PC powers on and wakes up. When I unplug the hub from the USB32 port on the motherboard the PC returns to normal operation. Just disabling the drivers does not resolve the problem. I am very disappointed because otherwise the unit is built very well and operates exactly as advertised. I will be returning the unit and looking for one with the exact specifications that uses a different hardware device.Buyer Beware!

Used for a computer upgrade. The old case only had USB2 and the new motherboard was USB3.2 capable. No issues install. Works great as required.

I needed extra USB ports on my new build. THis was easy to install and plugs into mother board and a SATA power plug. Fast USB with this. Fit in my old DVD drive slot. Very happy with this.

Item is exactly as specified and has a very high value per dollar. Is made out of metal.Solves USB-C issues when interfacing a legacy motherboard using a PCIe-X1 card having a Type-E port.

This is a good quality expansion for older cases that don’t have front USB-C ports. Good speeds on all ports. Plugs into motherboard USC-C connection.

Paste direct goed in case opening, werkt zoals beloofd en is zeet handig met de snelle USB poorten aan de voorkant van de computer case.

Il prodotto è costruito molto bene, bisogna essere delicati ad inserire gli spinotti anche se son ben costruiti, ho fatto un test delle singole porte e devo dire che va abbastanza bene, l'ho provato con un lettore di schede USB-C ultra rapido con una SD veloce, i file da 64GB li ha trasferiti in 1 minuto senza compromettere nemmeno un file, direi che il prodotto è molto affidabile. Lo consiglio.

komplett aus Metall und top verarbeitet. Meistens haben dieses Teile Kunsstoffgehäuse. Einziger kleiner Kritikpunkt ist dieses Netzteilkabel. Diese vieradrigen kurzen Strippen gab es schon vor 30 Jahren. Ein wenig länger, geschmeidiger und ohne diese 4 Einzeladern wäre schön. An meinem Netzteil sind auch "schönere" SATA Stromkabel dran.Passende USB 3.2 Gen 2 Buchse sollte vorhanden sein, manche älteren Mainboards haben die u.U. nicht. Aufpassen auch bei dem Stecker, die Ausrichtung ist bei diesem Ministecker nur sehr schwer zu erkennen und man kann ihn auch verkehrt herum in die Buchse würgen.Ansonsten war es am meinem MSI Z790 Board sofort einsatzbereit und alle 4 USB Buchsen funktionieren.

J'ai acheté cet interface pour la praticité. S'est mieux d'avoir les interfaces rapides devant le boitier que chipoter, d'autant plus que mon boîtier date déjà de plus de 10 ans, donc avec ça je l'ai mis à jour, mais.......heureusement que j'avais un adaptateur 5/4 3/2 pour le monter dans ma tour. Toujours est-il, que le câble de données doit être branché dans un sens bien précis, si non ça ne fonctionne pas, et il n'ai nul par marqué cette précision.