VEVOR 9U Wall Mount Network Server Cabinet, 15.5'' Deep, Server Rack Cabinet Enclosure, 200 lbs Max. Ground-Mounted Load Capacity, with Locking Glass Door Side Panels, for IT Equipment, A/V Devices

The network cabinet is good quality, and the wall mounting plate is very convenient. The only complaint I have is the assembly manual which is misleading when it comes to the side panels direction but since it’s only 5 frames that need to be screwed together just use common sense and it will be assembled in 20 mins.

Great value in server racks

Functionally this 9U cabinet is sturdy and meets the normal needs of a server cabinet. One thing that I found to be a little bit more challenging than necessary with this product were the locking mechanisms and instructions. I feel like there was a previous hardware design for this system, and that was not accurately updated in the user manual, and set up guide. This was more of an inconvenience than anything but did require me to partially disassemble the system, and reassemble it because of new mounting posts that were not depicted in the manual. And most important the dimensions for mounting are not necessarily the same for the product you purchased. The vertical dimension between mounting holes was not for the model I purchased. so physically, check your models mounting position before trusting the manual. One thing that either wasn’t apparent when I was looking at the system before purchasing was the glass door didn’t have a full metal bezel around it. If I had noticed that I would’ve opted for a full metal door instead. The hardware that it came with, seems to suggest mounting support for concrete walls or masonry structures. So if you intend to mount this to studs, then you will need to get hardware for that specifically. One of the most annoying things with this particular system during assembly was that none of the pre-drilled holes were tapped before hand Gauge of the sheet metal used. However, this made it a little challenging when all the side walls and tops were assembled and trying to install the rails. Also be careful with the edges of the rails as they are sharpening cut you or your cables. Lastly, there were several parts in the box that were damaged. Upon arrival these were not due to shipping damage, but packaging included some pictures to show them. There was damage to the side panels and the door given the sheet metal is a thin gauge I was able to bend them back and get everything to fit well, I also had to bend the door latch in order for it to close properly.

Nice Network Rack to have but a pain in the butt to assemble, and just hope nothing gets damaged while being shipped.

Can't lock the cabinet the lock lines up to the frame and blocks it. Not the best instructions. Really need to be able to lock this and don't want to send back after assembly

Product was dented, screws stripped with no effort at all, clips for the side panels were chipped and broken in corners. On top of this, the manual was inaccurate. I typically get solid products from Vevor, but this was terrible.. needless to say that I was frustrated through the entire assembly process.

Good quality

Works perfectly

Perfekt ist eigentlich für einen Server Schrank. Nutze es aber für mein Morion System. Preis Leistung Top würde es wieder kaufen

I love vevor, I have a vevor house, counters,small appliances,server racks, a nice column still and even a server battery! This server housing doesn't disappoint...

The build quality is pretty average. The biggest issue is that the screw holes and some of the connection points aren’t super precise, so things don’t always line up perfectly. During assembly I actually had to use a screwdriver and pliers to “persuade” a few parts into place and make the holes match up. It’s doable, but definitely not a smooth, plug-and-play install. Once it’s up, it does the job and holds equipment fine, but it doesn’t feel like a premium cabinet. Considering the price, I’d call it usable but not impressive.