WORKPRO 48" Adjustable Workbench, Rubber Wood Top Heavy-Duty Workstation, 2000 LBS Load Capacity Hardwood Worktable with Power Outlets, for Workshop, Garage, Office, Home, Pack of 2

The packaging was good and suffered no dings or damage. After unpacking the bench, the hardware (screws) had come out of the small zip bag. I ensured I had all the required hardware before starting. 22 tapping screws and 8 bolts. All there. I suggest you give instructions a good review before starting to understand how the legs and side rails connect. Not super hard to figure out but recommended. The legs are already bolted. You just need to tighten after you get the side rails connected to each side. I recommend two people and placing the frame on a work table. I have two horses and a couple of boards as my upholstery work top. That helped. Make sure you don’t tighten the screws until you’ve gotten the frame and corner pieces lined up properly. Once you have the frame together, proceed with placing the wood top on your work table and then place frame according to the position tabs. I suggest you use a tape measure to ensure the frame is even on all sides.You will need to drill holes where the tapping screws go into the slots. Remember you have 22 tapping screws. Once you have that done, screw the screws just so but not tight. The other part when you tighten the bolts on the legs use the hex wrench and 13 mm spanner (wrench) to tighten the bolts on the legs. Once you have all your hardware positioned, tighten them.The table turned out great. It seems to be a sturdy top and legs. I’m using it for my heavy duty sewing machine. Haven’t tested it yet but will soon. The frame is good quality and so is the rubber wood top. Worth the money. I want have to worry about my table vibrating when I use my sewing machine or the table buckling under the weight.I recommend buying this table if you are looking a sturdy workbench. It can be used for multiple purposes. Nice looking top. And can blend in with your decor or it can be used in your garage or storage room. One other thing it does not fold so be intentional about where you want to place it. Does not come with wheeles.

High quality, very solid bench well packed and easy to assemble. A solid value.

This is a great workbench. It was relatively easy to assemble. It is sturdy and I appreciate that the height can be adjusted. The workbench top is thick and attractive. My only issue was that the bench should be packed better. There were holes in the carton and the plastic bag with the nuts, bolts and screws was ripped open. By some miracle all of the screws, nuts and bolts were found loose within the carton and the bench was not damaged. Phew! I did a lot of research before purchasing this bench and can say that I am happy with my decision and purchase because it is a great bench. It is a quality product and the price is reasonable.

once put together, this table is very stable and sturdy feeling. I bought 4, but so far only got 1 set up. the height adjustment is nice but unneeded in my application because the default height is perfect. the built in power strip is very convenient. it doesn't wobble or twist, the top wood feels very thick and sturdy.couple complaints:1.) tabletop arrived with scrapes/gouges on the surface. i checked to see if it was from forklifts at our receiving, but they were on the end not anywhere near where the forklift came in to the pallet. this isn't a HUGE deal, because it's just going to be a workspace at a data center.2.) the "alignment stickers" are completely pointless and useless, they just put them on the edge of the wood which is not anywhere near where the base screws in, so you end up just having to measure anyway. looks like someone at the factory probably didn't care enough to put them in a place that you could actually use to line up the base to be centered. overall, i'd order these again but i wouldn't have super high expectations on quality control.also, hope you have a good drill - you're not gonna want to screw in the 24+ wood screws manually.

I was doing a new server install at a client; I did not want to spend 500 bucks on a server cabinet for a tower base server. So I bought this instead. It works beautifully. Super stable, accommodates the network equipment the computer monitor the server tower and two battery back ups with ease. I even stood on it to see how stable it was – I can confidently say it holds a 250 pound 5’ 11” male with no issues.

Really like the quality and sturdy stance of the table. Assembly was very easy to do.. I got the 6ft long table and it is heavy duty.

El precio es alto aunque es una mesa de trabajo rudo, todo muy bien, el precio muy elevado