Lian Li Universal 4- Slots Vertical GPU kit (with Gen 4 Riser) Black, Compatible with O11 Vision / O11D EVO XL / O11D EVO - VG4-4-V2X

A little shaky on the installation and if you have a three fan GPU, it needs a secondary support bracket, but those only cost like five dollars the bill qualities all right and as for size it’s slim enough to fit and nearly in the case without being too noticeable, I think it makes my GPU look beautiful

really easy to use and i like how you can adjust how far you want the gpu on the bracket. however it does look like it’s sagging at the end a little but personally i dont mind it

Very happy! Looks and works great, It fit well with this system: 2019 Lian Li O11 Dynamic case, with MEG X570 ACE motherboard, iCUE LINK H150i CPU cooler, MSI RTX4080 16 GB Suprim, Startech PCIe 4 port serial card. The not so good (but not showstoppers): * It was shipped 'bare' and 'unsealed' in the super-thin (~2mm) factory carton. Thanks to the great amazon drivers, it arrived safely anyway. * The instructions are on a small ( 14 x 21 mm) piece of paper, with mostly pictures, and few words. I can understand the economics of pictures (lower translation expenses), but it was difficult for me to get what the pictures were trying to convey. * The water pump on my CPU made it impossible to fit the GPU if one installed this adapter first The good: * I installed the GPU onto this adapter first, and then installed that combination into the computer. worked great! * No sag noted (instructions did saw to tighten the top screw first, which I think helped). * There was still room under this adapter for my single 4-port StarTech PCIe serial card to fit. * Looks great, shows off GPU * My guess is that cooling is better fans in bottom of case blow cool air through GPU fins I also appreciate the replies to my questions posted here before I purchased this product. That was the nudge I needed to give it a try.

Installed a 7900 XTX in standard (horizontal) format using the 'Z' bracket that comes with the model i got. Temps were a little hot and i didn't like the look. Install this Lan Li accessory and it helped drop the GPU temps ~8 degrees in vertical configuration. Pics of before and after shown. Works great in case i have - see parts list below. If use build with a Lian Li O11DX or similar case these work perfect. Parts list: - LIAN LI PC-O11DX - Dynamic Black Tempered Glass on the Front and Left Side - AMD RYZEN 7 9800X3D 8-Core, CPU - Thermalright AM5 Secure Frame Black V2 AM5 CPU Holder - MSI MAG X870 Tomahawk WiFi Gaming Motherboard - G.SKILL Flare X5 Series (AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL30-40-40-96 1.40V - 1X SAMSUNG 990 PRO SSD NVMe M.2 PCIe Gen4, M.2 2280 - 2TB WINDOWS DRIVE - 3X SAMSUNG 990 PRO SSD 4TB PCIe 4.0 M.2 2280 SSD 1X USED FOR GAMES/PROGRAMS/PHOTOS 2X RAID (MIRRORED) FOR STORAGE - XFX Speedster MERC310 AMD Radeon RX 7900XTX Black Gaming Graphics Card with 24GB GDDR6 - Seasonic Focus GX-1000, 1000W 80+ Gold - Lian Li Accessory Universal 4-Slots Vertical GPU Card Holder Kit Black - 3X Cable Matters 8 Pin GPU Power Cable 2ft, 8 Pin EPS / 8 Pin ATX Male TO PCIe Male Graphics Card Power Cable - NZXT 360mm AIO CPU Liquid Cooler with Customizable LCD Display - 3X Phanteks (PH-F120T30_BG_3P) T30-120 Fan Triple-Pack (9 TOTAL FANS)

Works overall, but could be stronger. Card sags a bit on the end. Can’t use all slots, some are covered by the back of the case. Wish I had waited for the latest version

Easy install. Used on 5070 card. No sag issues.

So, I finally got my hands on the Lian Li O11DMINI-1 Vertical GPU Bracket Kit—after accidentally ordering the wrong one the first time (thanks, brain). And let me tell you, it’s a fantastic upgrade for the O11 Mini! The quality is top-notch, as you’d expect from Lian Li; it looks slick, feels sturdy, and makes my build look like it belongs on the cover of PC Glamour magazine. But—and there’s always a but—the PCIe board could really use a bit more support. I’ve got a heavy video card that makes it bend like it’s trying to audition for a yoga class. I mean, I didn’t realize I was supposed to be monitoring my GPU bracket’s flexibility, but here we are. Don’t get me wrong, it’s still a great kit—if I could, I’d give it 4.6 stars, but the internet isn’t quite ready for decimal ratings. So, it’s a solid 4 stars from me. If you’ve got a heavier GPU, maybe have a backup plan for support, or at least be ready to give it a pep talk: "You can do it, little PCIe board!" Overall, a great upgrade to the Mini, minus the unintended “bending feature.” Perfect if you want to show off your GPU—just keep an eye on that tilt!

This Lian Li vertical bracket and riser cable works just fine in mt Lian Li O11 Dynamic EVO RGB Case. I inverted my case for the Left side of my gaming desk and I have zero sag ,riser cable is the perfect size. I would highly recommend this Lian Li Universal 4- Slots Vertical GPU kit (with Gen 4 Riser) if this is what you are looking for in your build.

harika

nessun problema a tenere su una rtx 4070 super ti senza flettere neanche di 1 mm

الصراحه يخلي الشكل حلو لكن غالي مره الصراحه 275 على شكل غالي مره

Suporta uma rtx 4090, encaixe perfeito no gabinete lian li O11 vision

Fácil de instalar. No genera esfuerzo en la tarjeta de video. En temperatura no note diferencia a la posición horizontal de la GPU. Es bonito de ver. Se instalo en un gabinete de la misma marca.