matx case,itx case,High Airflow Micro ATX PC Case, Support MATX, Mini-ITX, Micro ATX case Slim with USB3.0x1 I/O Port, Black Without Fans

Pros:- Cheap (as low as 18$ of you get the same case on aliexpress)- Smol (~15L in volume)- Aesthetically pleasingCons:- not beginner friendly- difficult to cable manage (but not impossible with good planning)- construction isn't the sturdiest but with the side pannel on doesn't flex too much- front fan mounts don't allow for a 120mm radiator or alternate heights to mount the fansOther notes:- Can fit a 267mm in length gpu if you don't mind disassembling and reassembling the card like a ship in a bottle, as well as omitting the bottom fan- max wattage for a CPU with the largest cooler that will fit (PA 120 mini) is about 100w, any more amd it'll thermal throttle.- max wattage for a GPU is about 240, any more and it'll heat the CPU too much and also thermal throttle.- the holes on the side aren't quite big enough for regular case fan screws but thinner ones with a nut on the back will fit(did require widening slightly by rotating a Philips screwdriver in them)- does fit a 80mm fan with 4 screws on the side, or a 92mm fan with 2 screws and slightly cockeying the fan(ONLY IF YOUR GPU DOESNT EXTEND ABOVE THE TOP OF THE PCIE BRACKET)Overall:Definitely can't beat it for the price, does have room for improvements but if you set your expectations accordingly you won't be disappointedDISCLAIMER: he first one I received didn't appear to have shipping damage but the case was bent up and dented where the PSU mountsParts list:CPU: 4790k @4.6ghz 1.269vCPU Cooler: PA 120 miniMotherboard: ASUS Z97IRAM: Gskill 2400nhz cl10GPU: GTX 970 FTW+ 1500mhz (1.2v) 8300mhzPSU: TX550mFANS: 2X 80MM TR8, 1x 120mm TR12

Decent case for the money. Solidly built and sturdy. Good option for a small, simple build on a MATX mobo. Just know that you NEED to be familiar with how to build a PC because this thing comes with NO documentation. Not a problem if you're experienced but you REALLY need to be familiar with the typical front panel header standards. In particular, how to spot the difference between the USB header and the Audio header as they are NOT marked and look nearly identical.This case will also not fit a GPU any longer than about 10.5" so if you are looking to build a mini gaming rig that could be an issue. I'm using mine as a home firewall / media server so the onboard graphics on the Core i5 12600 is all I really need. No GPU requiredBeyond that, my only real quibble is that the fan that comes with the case is super cheap. Just a 2 wire (on/off) with a plug end designed to interface with old school 4 pin molex style connectors (what PSU even COMES with those now?? Everything is SATA standard)Anyway, I swapped that junk out with a slightly less cheap 3 wire variable speed fan 80mm size and everything is groovy.

For 30 bucks, you really can’t beat this little case. I got it in white. Came the next day and was even small enough to fit in an Amazon locker. There’s enough room for an m atx mobo, or itx mobo. (M atx makes it alot easier to find parts for a good price but beware you will have less space than if you were to use an itx)Also enough room for a discrete gpu, but clearance is limited, and you will probably have to use a smaller gpu (such as 5700 xt itx or another single fan card like the 2060 or rx 550) I tried to put a sapphire nitro rx 580 inside the case and there was not enough space. Vertical gpu riser would def help with this and give you more options.You can mount 2x 120mm fans on the front panel which is fantastic for airflow, and it comers with a pre installed 90mm exhaust fan (little bit of a bonus) but if you’d like to replace the exhaust fan, there is only enough space for a 90mm alternative fan. Front panel connectors for usb, power button and reset sw are also included.My one complaint it the front usb ports. Only 2.0, no 3.0, and while the price is cheap enough, it’s 2024, and nobody needs 2.0 on the front of a pc case anymore. Which is why I’m deducting one star.Still well worth the buy in my opinion. This is perfect for a light gaming rig or an office/work pc.

The case its fine, good enough quality and my parts fit perfectly but the front io usb 3 and the usb 2 + audio board isnt working. My motherboard its fine because it reads other cases front io connectors. I wish i could give more stars but i have 4 dead ports on arrival. Maybe if they were to send a working replacement i could change the review

I recently purchased the MATX/ITX High Airflow PC Case, and I must say, I'm thoroughly impressed. This case strikes the perfect balance between compactness and functionality. Despite its smaller size, it accommodates both MATX and Mini-ITX motherboards seamlessly, making it versatile for various build preferences.One of the standout features for me is its exceptional airflow design. The case comes with strategically placed vents and fans, ensuring optimal cooling for my components even during intense gaming sessions or CPU-intensive tasks. I've noticed a significant difference in temperature compared to my previous case, which speaks volumes about its cooling capabilities.Build quality is another aspect where this case shines. Despite its affordable price point, it doesn't compromise on sturdiness or durability. The materials used feel premium, and the construction is solid, providing ample protection for my components.Moreover, the layout of the case is well-thought-out, making cable management a breeze. There's plenty of room to route cables neatly, which not only improves airflow but also adds to the overall aesthetics of the build.In conclusion, this MATX/ITX case exceeded my expectations in every aspect. Whether you're a casual user or a hardcore gamer, this case is sure to meet your needs. I highly recommend it to anyone in the market for a compact yet high-performance PC case.