ECO-WORTHY Forward Reverse DC Motor Controller Kit (8V-35V) - 12V/24V Wireless Remote Relay Module for Linear Actuator, Solar Tracker, Industrial Automation & Smart Home DIY

Worked exactly as expected. Based on other YOUTUBE videos, I fabricated a remote controlled linear actuator pull behind broadcast spreader. IMO, much better than what I saw online with no catastrophic point of failure. This controller is well worth the price.

The hardware works perfect. I'm very happy with the product. But I had a question for the manufacturer and it took them several days to get back to me and when they did they didn't even answer my question they ask me what my order number was so that they could go review to make sure I actually bought the product. I got back to them a couple days later after searching for my order number. And they got back to me for days later with an apology cuz they didn't understand my very clear question. I realized that I wasn't going to get help from them and sought out my answer from YouTube which I found and everything is fine.

I'm using this to open a large storage hatch underneath a queen bed in the RV which I reinforced for this purpose. Worked perfectly out of the box. The remote seems to need its antenna extended even at short range - otherwise, stopping the stroke does not always happen.

The unit is fine and functions as described. I am writing this so others can understand what is needed if you want to use two limit switches to control the extend and retract limit using the M and N terminals. You will need two NPN NC limit switches and two diodes (I used 1N54xx diodes I had on hand). Wire the brown wire from your sensor to the + input power to the controller and the blue sensor wire to the - input controller terminal. The black wire from the sensor goes to the M or N terminal. The M terminal controls the extend limit and N controls the retract. Between the sensor and M or N terminals you need to put your diode so current can only travel to the controller. When the sensor is tripped it will open and travel will stop, you can then press the opposite direction button, A or B and it will travel until it hits the other sensor. I incorrectly assumed that there would be an internal diode and had trouble getting to work until I diagnosed with a multimeter. Anyway, I hope this helps someone.

Works great

This controller worked straight out of the box! No programming just wire it up and go! I highly recommend!

This remote control is virtually useless. It seems to work fine for activating a linear actuator in either direction, but very inconsistent at stopping the motor, resulting in very undependable operation. I replaced this unit with one from a different supplier and ended the irritation. Buyer beware.

Found it to be intermittent using the supplied transmitter. I tried different distances but always the same. Returning for replacement and will update when I get the replacement. UPDATE... The replacement came in and does the same thing. The problem is that there's a delay between the button being pushed and the receiver processing the command so you need to long push each button. For example, if you press and release as you would your tv controller it misses about 30% of the time. To fix it, you need to long press the buttons so each push needs to last a full second. Then it hits each time. The reason this is important is that in my application I don't see the roof vent opening unless I go outside.

この、配線図を付けて下さい。

Perfect fit

Gran producto para automatizar y hacer proyectos

とても、使い勝手がよく4台目の購入です。 本体、リモコンとも耐久性に問題はありません。 お気に入りの商品です！

Bought 2 and both DOA out of the box