GorillaEpoxy Ultimate, Waterproof, 10 Minute Set, Permanent Bond, Dries Black, 0.85oz Syringe (Pack of 1)

I used this for installing a black granite counter (the seams between pieces). It worked beautifully. It was the only black epoxy I could find and the final results are fantastic. The bond is rock hard and strong. It sets quickly - you really only have 10 minutes max before it's not workable. It goes on non-flowing so it would work well on vertical surfaces. Extremely easy to apply - just break the tab, squirt onto scrap material and mix with included applicator stick. The only thing I needed that wasn't in the package was a standard razor blade to press it in the seams and shave it off (which you should do before it completely sets). You would think it would be a nightmare to clear up but it cleans up amazingly well and quickly with acetone. Rubbing alcohol works too. Just apply it with a paper towel and it instantly starts to dissolve (turns bluish!) . I did this after about 10 min. I think it will be much harder or impossible to clean up like this if you wait much longer than 10 min. Because it's a two-part epoxy it stores well for continued application at a later time (no drying the tip shut like regular glue). As far as quantity, I needed about 2.5X as much as I originally thought, but that might just be my inexperience. I was not able to return the one leftover tube because it was "unreturnable". But since it stores well I now have a tube of great black epoxy if I need it!

Good stuff, sets quick and strong. I've used it for various reasons and has always held strong. Recommended

Great product, decent price. Works great, super strong. I made the mistake of using too much and then it took me forever to sand it smooth, but that was my fault. Very happy with the product.

I used this to repair a Henckels knife handle that we had broken and one that was melted. The repaired portion of the handle was approximately 1.5inches long and after the repair (mix, tape form, pour, cure, sanding, polishing) the handle looks almost like new, and we are ecstatic with the results. The black color matches the original handle. We are betting the fix will outlast the knife!

WOW, this stuff has an odor... the only way to describe it that I could come up with is that it's profoundly offensive to the senses. It is an odor that lingers, and it is quite literally nauseating. It's not foul, nor rotten, as words like that don't really fit... nor is it like any "chemical smell" I've encountered before. But it definitely offends the olfactory sense, disconcerting so. Perhaps another way to describe it would be, traumatic. I'm only half joking.The odor managed to cut right through my P100 respirator like it was nothing, and I had to break out my WWII-era clf Fe activated charcoal gas mask in order to work with this stuff indoors. If you don't have that sort of filtration equipment available, then absolutely only work with this stuff outdoors. Even if you do have that sort of equipment, ventilate the area thoroughly. You'll regret it if you don't.With all that said, once the stuff begins to cure, it doesn't take long at all for the odor to stop emanating from it, and it's fine to bring your workpiece indoors after that. But wow, that odor is one I can not ever un-learn of, and I almost wish I could.Anyway, the bond it creates is impressive, it's some of the strongest, if not the strongest, epoxy I've ever worked with. I bought it mainly to bond two pieces of metal together, and I'd say while it's not quite as if they were welded or brazed together, it's probably the closest one could get to brazing without actually doing so. So that's impressive.I wish I could give it five stars for bonding strength, but frankly I'm being generous by only knocking off one of the stars for the you-know-what.

Used this to fix a bed safety rail on my adjustable bed. One of the welds broke and I don't have access to a small welder that can fix aluminum pipe. I found some self adhesive fiber net tape and wrapped the "t" broken area first and then mixed the glue as recommended. I did follow the instructions on doing ourside or well vented area. Did mine in an open garage. Used a popsicle stick to spread the glue even and waited for it to harden overnight. It dried quickly within the timeframe it listed. Strong as heck! Just made the rail like new again👍 thanks for a great product.

This epoxy is very nice to use. Must mix it outside smell very strong and you must be ready to use it the minute you mix it make sure your area is clean and prep because it sets up in three minutes and it’s totally hard with 10 I find myself using this a lot the only downfall is that the color I purchased black I don’t know if it comes in clear but if it does, that would be the word other than that this is the best I’ve ever used . I cut the tube extremely small and I use siding aluminum nails tiny to put in after I’m done.

It was an excellent-quality glue, like all Gorilla products. I used it to glue my sandal, mattress, iron, plastics… I just didn’t glue my house because it was still in good condition!