Bolt Dropper T-Nut Wood Insert - Carbon Steel, Black Zinc Finish - 4-Prong 1/4"-20x5/16 - Flush Surface Fasteners for Wood, Particle, or Composite Materials Workpiece - Set of 100, Salted Pecans

Our big box store is always out of these and when they do have them they are like $2.50 a PAIR! Outrageous!These were a great value by the 100 bulk pack and they arrived in 2 days. I will be buying more of them on Amazon. Well made and they work great. A+++

Looked all around for these locally with no luck. Ordered these and received in a few day. They work great for our application.

I bought some of these in the 1/4 x 20 size to make a custom spoil board for my Shopbot desktop router. I really wanted some without the barbs on the back, but I figured at $10, I'd take a chance. They worked out exactly as I hoped they would. Since these were on the back of the spoil board to provide hold down locations from the top, I took a pair of pliers and easily broke the barbs off as the MDF I use would have never survived those barbs. I then drilled a 3/8 hole in a piece of mild steel and used it as an anvil to flatten the rim of the Tee Nut out.For those who are interested, I used a .800" x .075 counter bore on the back with a central hole through the spill board of .310" diameter. This required tapping them in with a mallet and I used a flat punch to make sure they were seated into the counterbore so they would not contact the machine bed.It's a little more work than buying the brad hole version, but they are insanely cheap. When this spoil board is used up, I intend to just use a 1/4 x 20 bolt to drive them out from the front and reuse them. A great product at a great price. BTW, none had tight or distorted threads, all were free running!My only complaint is I wish they made these with just a round rim for the same price so you didn't have to remove the barbs.

They are good quality, but we normally install these with some adhesive to hold them in better. The coating finish doesn't stick well to epoxy or other glues so they didn't hold as well as unfinished ones did.

They work fine to hold the plywood sides into my trailer.

Does what it's supposed to do

Consistent product used to build a suspended wall in wood shed

Exactly what you would expect

This product is well built, threads were well taped and had absolutely no issues with it at all… this product is well worth the purchase

I bought this as an add-on for my climbing walls. Works great and are sturdyer than I've expected. For the price, did not count them they are alf the price than the one I could get near home.

Sure beats buying these 3 at a time at the hardware store!

Work as advertised

Pour ajouter des crochets à une courroie de machine à ramasser des pommes dans un verger