FLOW SWITCH, Grid Controls 1"" M210 Flow Switch with electrical box, dual receptacle and cord, Chemical Dosing Control, For Pump, 57-F1-2200-010

Description

To use with pumps and heaters without any wiring hassle. Just plug your water (bottom receptacle) and chemical dosing pump (top receptacle). The flow switch has a 10A microswitch that provides closed contact when there is a water flow and open contact when there is no water flow. The microswitch is prewired to remove any wiring need. The flow switch provides dual NEMA 5-15 receptacle in weatherproof box and in-use cover and 9' power cord with NEMA 5-15 plug. All UL rated components are used in construction. The bottom receptacle is always HOT (powered) and can be used for water pump. The top receptacle turns ON/OFF with the microswitch and can be used for single phase chemical dosing pump. GRID CONTROLS PART NUMBER:57-F1-2200-010 Micro Switch Rating: 10A Maximum 230V Turn On at and above 1.1 GPM flow Turn off at and below 0.5 GPM flow 1" PVC Inlet and outlet socket connections, Glue type, insert 1" pipe in to the flow switch and glue it. 1-1/4" PVC Inlet and outlet spigot connections, Glue type, Insert the switch in to 1-1/4" sockets and glue it. Wetted Surfaces - PVC, Polypropylene, Buna N, SS304 Line Pressure: 50 PSI Temperature: Up to 110 deg F Underwriters Laboratories listed Note: 1. Adding flow switch in the line will add pressure drop and restrict the water flow. You can expect 10-15 GPM maximum water flow through our 1" flow switch depending on your water pressure. 2. Installation and troubleshooting instructions are available on our website.