BITFENIXBFC-PRM-300-KKXSK-RP Prodigy M PC Case without Power Supply - Black

It was delivered really fast and the case is brilliant to work withvery easy to fit all components in and looks great when finishedWould be advisable to getextra fans and fit a fully modular psu

Have used this for just under a year as my daily case, I have the windowed version because I'm a little vain and like showing off my components. The build involves installing the motherboard and therefore all the components upside down, but this isn't too much of an issue if you change your fan configuration a little.There are a lot of good things about it, the shape and style are pleasing to look at and being able to carry it around by the handles is a nice bonus. I like all the slots you get for hard drive mounting, especially the 3 x 2.5" bays behind the motherboard- though this does make it a little difficult to put the rear side panel back on with all of them populated (I recommend thin, non-angular SATA cables)There's also plenty of room for full-size enthusiast grade graphics cards, with the option to go crossfire or SLI with them if you don't have a CD/DVD drive. If you're planning on doing this then I suggest mounting fans pushing air in to the case at the top and venting air out of the back.Carrying on from that, I have to say the biggest drawback with this case is airflow. The PSU is mounted at the front so will be pushing air from the front of the case down to the floor, any fans you have mounted at the bottom will then be sucking this warm air back in to the case. Using the top as an exhaust is also difficult if you have a blower style (most common) graphics card installed, as the fans on your card will be fighting for air because of the upside-down design. I find that pushing in air from all 4 top and bottom fans, then exhausting air (sadly from my radiator in my case) out the back was the best for CPU/GPU temperatures, which made things a little toastier than I'd like, though I urge you to play around with the fan configuration and find what's best for you.I would still recommend this case for mATX builders looking for something to show off, it's definitely an eye-catcher and is pretty durable despite the flexing handles. The top mesh is really nice to have and is easily cleaned of dust. If you're not going with the windowed side panel then cable management isn't all too bad if you feed the cables behind the PSU first. Though I do recommend getting the window side panel along with a modular power supply, especially if you can grab one with a short cable set like the Silverstone strider series, which in itself is a smaller than average PSU and was perfect for my X99 build.

The interior of this case is really well designed, you can fit a lot inside it providing you add components in the right order and have the patience to fiddle around with small screws. The instructions aren't very clear but with a bit of common sense you can get most parts in here, and there are guides online.One side has USB / 3.5mm ports on it which have the cables built in, these are a long enough length and work fine.The metal seems quite thin so I don't know how it is going to hold up in the long term if you open and close the side often (reminds me of a thermaltake case I had, the door metal clips snapped). The plastic handles / feet are also pretty rubbish, they mark very very easily as they have a rubberised material on them, and they aren't very strong. I don't feel particularly safe carrying this with the top handles, and when it's stood on a wooden desk it's not very stable. The plastic bends a lot which makes the whole case wobble.Also, not sure if this is just the case I received but the power button is on upside down, a little annoying.

Poor. Everything is in the way of everything else, the power switches and USB ports are attached to one side panel, which is also the mount for the 2.5" hard drives meaning you can't remove the side panel without disconnecting a load of wires.The method of mounting 3.5" drives is absolutely terrible and they are left insecure - just plugging the SATA cable in is enough to push the drive out off it's mounts, and if you fit drives on the side bracket, these need to be disconnected and the bracket removed before you can access the motherboard.There are fan mounts on the front panel, but none of these are usable because the power supply is in the way.The "heat shield" supplied to block the air vents in the base of the case is just affixed using magnets and falls off every. single. time the case is moved.The build quality is decent, but the design of this case is absolutely awful. I usually really enjoy building a new PC, but building one in this case was an absolute chore.

Overpriced case, looks nice, but not functional and not very durable as well.First of all - airflow is rather bad, so you'll have to remove side cover if you're using normal Graphics Card and want normal temperatures.Secondly - since my machine is rather beefy (have additional coolers plus water cooler for CPU), bottom arms broke after a while, so now this case not only not functional, but also not pretty :D

Great pc case and for an itx it was relatively easy to build in, good air flow and design

Beautiful case with a small form factor which posed a challenge for me as a first time PC builder trying to get everything to fit into place

I love this case it is a perfect size for me although it is wider then usual but what attracted me to it was its simplicity and size.I got the case and unfortunately the fixing points for the screws where the handles meet the case, the plastic around the holes was cracked due to over tightening from the factory, I guessHave contacted company regarding the cracks in the handles the suggested that I keep the case and they will send me new handles.Been a month and nothing has happened still waiting have wriiten action letter.

Es más grande de lo que parece en las fotos. Tiene muy buen espacio, y en general se la ve muy bien construida, excepto las asas, que son un poco débiles.Yo la he montado con 2 discos duros, y 3 SSD, y aún me caben hasta dos HDDs más, si quito el ventilador de abajo y lo pongo arriba (por ejemplo). Además, le he puesto una Sapphire 7850 HD, que cabe perfectamente, así como una fuente de tamaño estándar (ATX).TL;DR: Muy buena caja, muy versátil. Fallan un poco las asas, que no son todo lo resistentes que deberían.

Boitier silencieux et filtre anti poussière efficace.Néanmoins attention aux poignées qui sont fragiles.C'est un boitier compacte très fonctionnel en gain de place.

*Aktualisierung*Ich habe das Gehäuse jetzt schon etwas über ein halbes Jahr,Das gehäuse sieht nach wie vor super Aus und hat sich gut gehalten.Ich habe nachträglich auch ein Seitfenster eingebaut, und meine Komponenten rot beleuchtet.+ Gehäuse sieht immernoch aus wie neu+ sehr gut modifizierbar -> viele Teile können mit bsp einem Seitfenster oder in einer anderen Farbe nachbestellt werden.+ komplette wasserkühlung lässt sich mit ein wenig geschick problehmlos und sauber aussehend einbauen.- Wenn viele Komponenten bsp.: 2 Grafikkarten Wasserblöcke etc. einbaut werden steht das gehäuse Schief, da die Elastischen Griffe/Füße auf der Seite des Motherboards unter dem Gewicht leicht biegen, Auf weicherem Boden (Teppisch) Wird dieser Effekt noch etwas verstärkt.- Das Case war jetzt schon auf ein Paar Lanparties, und da ich immer die Oberen Griffe zum Tragen verwendet habe , haben Diese an den Gebogenen stellen Risse bekommen. Sie heben noch, ich würde es Allerdings nicht drauf anlegen mein gewichtigen PC nochmal nur Mit den Griffen zu tragen._________________________________________________________________________________________zu erst mal hammer geiles design... ich liebe es!das gehäuse bietet mehr platz als ich erwartet hatte.verbaute komponenten:Asus Gryphon Z87 MainboardAsus R9 280x , sehr leistungsstarke und vor allem große grafikkarte,wenn man auf ein laufwerk verzichten kann passen auch 2 rein.cpu mit 120mm radiator wassergekühlt.insgesamt 5 120 lüfter.2x 500 gb HDDs und 1x 128gb samsung SSDzum Kabelmanagement:viel möglichkeiten gibts da nicht... es gibt hinter dem netzteil ein bisschen platz mit c.a 20 kabelbindern und 2 stunden arbeit hab ichs aber hingekrigt ... man sieht fast kein einziges kabel ;Dzwecks kabelmanagement habe ich auch die seitlichen abdeckungen vertauscht... der an/aus und der reset butten sind jetzt halt auf dem Kopf ... stört mich aber nicht.Verarbeitung:das gehäuse an sich ist sehr gut verarbeitet lediglich ein paar kleine schwächen gibts...zu dem füßen(griffen(was auch immer)):gut verarbeitet, Stabil jedoch wackelt das gehäuse etwas wenn es auf einem festen boden steht bsp laminat...auf meinem Teppich gehts auch ohne wackeln...die USB 3.0 seitlich vom gehäuse sind nicht passgenau... der stecker passt aber die stecker sind etwas wackelig und irgendwie.... einfach komisch. sie funktionieren aber einwandfrei.

Apres 9 ans, le plastique de ma tour prodigy de bitfenix devient collant. Certes elle n’est pas nouvelle mais je trouve que la qualité du plastique aurait pu être mieux évaluée à la conception !

Also ich finde dass das Case sehr schön aussieht. Dennoch ist es sehr billig gebaut. Bei brach beim Zusammenbauen ein Plastik Teil ab.