🚀 Elevate Your Ride with Precision Performance!
The Innovate Motorsports DB RED Wideband Air/Fuel Gauge Kit (Part Number: 3796) is a comprehensive solution for automotive enthusiasts seeking to optimize their vehicle's performance. This kit includes patented DirectDigital Wideband Technology, allowing for precise calibration of the O² sensor, and features two configurable linear 0-5v analog outputs. Weighing just 4.9 ounces, it comes complete with all necessary components for easy installation.
Manufacturer | Innovative Motorsports |
Part Number | 3796 |
Item Weight | 4.9 ounces |
Product Dimensions | 20.47 x 1.57 x 20.47 inches |
Item model number | 3796 |
Item Package Quantity | 1 |
Measurement Accuracy | See description |
Included Components | Gauge, LC-2, Bosch LSU4.9, Sensor Cable, Bung, Manual |
Batteries Included? | No |
Batteries Required? | No |
J**.
This kit was fantastic. The quality is great
I bought this to replace one of their competitor's systems that was too complicated to install and got fried. This kit was fantastic. The quality is great, the wire going to the sensor is so sturdy it looks like a household extension cord! Easy to follow instructions are included, no problems whatsoever. Gauge is working great.
A**Y
It's accurate and extremely amazing deal
The installation instructions are really straight forward and understandable. I would say installation was a breeze but I also feel that is completely dependent on your mechanical abilities. Super clean and surprisingly bright led display but not so bright that it would need to have the dimmer wired up. Very accurate readings.
J**.
Reliable and Accurate
This wideband has been consistent and reliable so far. I've had this installed in an FC RX-7 turbo for about half a year. The bung is about three feet from the turbo to avoid extreme temperatures, and the sensor has been fine. I love the small footprint of the controller and included gauge especially when compared to my old LM-1. I can't think of a single negative thing to say about it yet.
S**I
Great product, highly recommended!
I have had this gauge/sensor installed in my car for over 2 years and I haven't had any issues at all, and it is still working just fine.The kit was very straightforward to install, connection to the PC for data logging works well, and the recalibration process is very simple as well. I have used this gauge to tune my car many times successfully.I suspect that most of the issues people had may be related to the sensor being too close to turbos etc and it getting too hot, or similar installation issues. I recommend you read up on the best spot to install the sensor and the unit for your particular car/model, and hopefully it will give you as a long service as it has given me.
E**N
Good enough for me!
Used a relay exactly per instructions. Followed the instructions carefully, had great success installing and no issues. Ready for a camm’ed 5.7 Hemi now.🦾🩸
H**E
Ensure you use a relay to do a high quality switched 12v supply with a solid ground.
The product is good, however, they are quite sensitive to the 12v supply and if you don't get a really good 12v supply with a good ground it will burn out your sensors every 1000-1500 miles.
C**K
Buy a different unit.
Garbage. Quit working after just 3 months. It may be that the o2s is too close to the heads according to the installation instructions but somehow the stock o2s survives in the header collector just fine. I've heard more bad than good about these, move on. Better units cost the same amount as this one does.
J**.
Meh
Mediocre at best. Sensors or controller need to be constantly recalibrated - and even then they're not very accurate. Dialed in my street car with this and was having some funky issues with the tune. Finally got it on the Dyno and found it was a full point and some change off. Luckily it was on the fat side, so no harm done - but there are far better sensors and controllers out there near this price point. Do yourself a favor and spend the extra money on a better setup.
D**B
Broke after a month
Worked well for around 1 month, and then it fried the Bosch lambda sensor. The Innovate box has a really basic heating and calibration strategy which ultimately is not good enough to keep the sensors alive, and those are very expensive things. I certainly won't buy another Innovate product
B**R
Accurate and looks clean!
Arrived on time as described. Great product. Wiring instructions were detailed and easy to understand. Box includes all wiring plus weld on bung. Gauge looks very clean and matches factory red gauges (08+ Subaru Sti). The ring around the gauge is matte black and looks very sharp next to the tinted glass face of the gauge.
N**3
A must have for any boosted application.
Replaced my old AEM UEGO with the LC2. Install went straightforward just make sure to open air calibrate it before installing the sensor in the exhaust bung. Gauge is a little tough to rear during the day but night time it is crystal clear. Make sure to clean the gauge face after removing the protective film as the glue was starting to stick onto the face of the gauge. Very impressed with the accuracy on my tuning software, the AEM was not accurate at all.
D**N
Five Stars
excellent product. fast shipping
T**R
The gauge looks great and perfectly matches the interior of my RX7
I bought this a while ago, but I only just now was able to install it.The gauge looks great and perfectly matches the interior of my RX7. I installed the wideband at the 12 o'clock position, 3 feet from my turbos because rotaries burn hot, and I haven't had any issues yet. So far, this is a 5 star product, and you can't beat the price.Update: it's been 8 months since installing this and I've put 15000 km on it. No problems yet. Exceeded my expectations. Proper installation is key, everyone!
Trustpilot
3 weeks ago
3 weeks ago