PTM7950 31x50x0.25mm Phase Change Thermal Pad, JOYJOM High Conductive Silicone Grease 8.5W/mK CPU Thermal Paste for PS5 Steam Deck ROG Ally CPU GPU SSD M.2 Laptop

Hard to handle but works better than thermal paste.

These were my temps before PTM with generic thermal paste , I'm on a lenovo legion y540 laptop . Been facing heating problems a lot and this seemed like the only option because the thermal paste never stayed on the cpu . Would recommend for laptops . I still have half left so the PTM can be used twice in my case. Also received delivery in 8 days which i am extremely happy with. Would suggest over thermal paste for laptops.

This product is somrthing every build should have. PTM7950 after application was able to reduce 20°c from the hot spot of my AMD RX 7900 XTX. Also I have seen videos where the temp would go down on further usage.Be careful in applying it. It has potective film on either side, so keep in the freeze hox for a bit of hardening where the removal becomes easy.Use the removal stickers included in the package to peel off the protective film on either sides and best thing is to use a tweezer if you have delicate hands.

Package contains PTM7950, a screwdriver, brush, ethanol wipes, green sticker for applying the pads, finger gloves.It was a bit hard to cut and apply comparing to just using regular Artic mx6 thermal paste. but the performance is on par with liquid metal.In my case the additional equipements was not that usefull as I had IPA solution and tweezers to correctly apply it.If your device previously used thermal paste instead of liquid metal, PTM7950 will make a difference.In terms of cost, its a bit expensive. if youre on a budget, go for artic Mx6 but you may need to reapply it after a year or two.The shipping experience was weird. the seller created the shipment two times, one on the date of order, second at the delivery date. The shipment was late by 3 days from expected delivery. This may be due to importing, i dunno.

Temp from 100+ to 70-80 (overclocked condition)Came with full installation kit screw drivers and allVery easy to apply(NOTE- before peeling off the plastic off from thermal pad make sure to put it in refrigerator for 30mins or till the thermal hardens up )

It's bit hard to apply but once you successfully applied this, you will see drastic temp drop.

Good

The temperature controller is better then thermal paste I used before