Screw Extractor Set, Hex Head Easy Out Set 10 Pieces (1/8”-13/32”) | Multi-Spline Ez Out Stripped Extractor, CR-MO, Stripped Fastener Tool

Suprisingly enough these actually work. I use a socket to put them in and use a ling socket extender and manually turn the broken screw out. Wotks like a charm once started then use socket wrench to finish the job. I've used left handed drill bits with no luck ex dpt to start a small hole to start the screw extractor sometimes just tap it with a rubber mallet or mini sledge hammer. Used it mainly on my Harley motorcycle. Have a tendency to tightdn screws a little to much and end up braking them off

I have owned and lost countless screw & bolt extractors, however this set is extremely well made and hold up. I had to remove 8 bolts from a high pressure pump that apparently hadn't been removed since Reagan was in office. Of course one of the hex heads had to strip. The set came in, with a great deal of effort, force and my pride not letting me give up, crack the bolt broke loss.The extractor really grips. When you first put the extractor in and begin to twist, the extractor will twist in the hole. Once it gets a grip, don't give up until it breaks loss!

Did a great good getting a hex bolt out of my BMW. Critical tool

This thing is a piece of junk, one came already damaged and stripped so I used a different one and the quality is so bad after like one use the top of the head is already starting to wear down a lot. I used it just as the video said. Terrible quality do not buy

Probably my fault for buying these, but they're too stubby to stick down into any hole and engage the screw. I bought them to fix an electronic device and the screw was a bit too deep inside the case for this thing to reach. I wish I had bought ones that were longer, and more flexible. The part on the end is also an odd size, something 13mm but the standard size equivalent perhaps. That was the selling point for me, thinking I could put a metric socket on it from my automotive repair box. I'd comment on how the product worked, but it wouldn't even contact the head of the screw that got stuck. The screw that spurred the decision to buy this, and it did not work.

Extractor set worked great! I was concerned extractor wouldn’t remove the tight stripped screw. But with a breaker bar and socket the stripped screw came out with ease.

Worked first try! Love the little compact case it comes in.

The material of the extractor was not as hard as expected. Two extractor blades were stripped before the third and bigger extractor was used.

Did what I needed to fox

Broke first use.