Cooler Master MasterLiquid ML120R ARGB Close-Loop AIO CPU Liquid Cooler, 120 Radiator, Dual Chamber Pump, Addressable RGB Lighting , MF120R Fans for AMD Ryzen/Intel LGA1151

Quick pros and consPros:-Installs very easily-Keeps my OC'd 3770k cool-Lighting is awesome especially considering how scarce ARGB is on the market atm-Color controller works well-Does what it advertises to do, can't ask for much more than thatCons:-While not Cooler Master's fault, the software to control the ARGBs is a bit scarce at the moment (I reckon motherboards manufacturers will start updating the software to alleviate this)Got the cooler over the weekend and was a breeze to install on my 3770k. I've since been monitoring temps under load (gaming, not stress tests) and it seems to hover around ~45c. Definitely suggest using this with a case that has a clear panel so the lighting can be viewed as the lighting is pretty stellar.

overall a great product, looks very nice, only downfall is so many wires, its just a clutter, 2 fan cables, 3 rgb cables, mini usb cable, all connecting to rgb box with sata connector for power. Good thing is the device is simple to use once installed, i recommend the rainbow mode.

Looks great, performs very well. The cables all seemed a little short though. Having to use cable extensions in an ITX case (albeit a large ITX case - NZXT H200) was a surprise.The back panel that the mounting adapter attach to is some sort of a plastic resin, and is a bit on the weak side. Don't try to flex a mounting leg when it is attached to the pump housing or you will snap the mounting ear off. Luckily, the adapters apply distributed pressure so it didn't affect the mount ability, plus the adapters squeeze the back panel onto the cpu block instead of pulling away from it. To clarify, it is pump-mounting adapters-back plate-gpu block. If it were pump-back plate-mounting adapters-cpu block, I would have had to buy another one.When installing the pump, pay close attention to clearances behind the tubes-they contacted something on the motherboard that kept it from seating against the heat spreader so I had to rotate it 90 degrees to install.My only real complaint is the Cooler Master RGB software. If you want a custom pattern that isn't static, and close the software, the pattern stops. Inside the software there's no option to SAVE the pattern onto the controller card. There's also no option to minimize to the system tray. You hit the x and it closes, or you minimize and its a big tab in the taskbar. Also, the custom pattern doesn't have any addressable functions. It's just per channel. If you want custom addressable functions the only option is static colors.Also the instructions are terrible. Just the worst. Even the downloadable ones.

Both of the fans I received with my cooler have issues. One of them only works when facing up, and even then it makes noise/scraping sounds (even when not installed and just connected to a fan header to see if it works, it makes noise). If you install it so as to blow air horizontally, it barely turns and makes more noise. If facing downward, it doesn't work at all. You can manually turn it with your finger, but it feels "stuck". There's nothing physically in it, so I have to assume it is just a poorly made fan that should not have passed QC. I put some silicon lubricant in it to see if that helps, and it's somewhat better, so it makes me think this thing sat around a long time or was stored in sub-optimal conditions.The second fan only makes noise periodically, but once again works best when facing upward. If used horizontally, the noise increases. It seems Cooler Master fans are only good for blowing air vertically, which isn't particularly useful depending on your case layout.I gave the product 3 stars because it does look nice when lit-up, and the temps are good (again assuming you mount the one working fan you receive in a vertical orientation). The setup is somewhat convoluted, and the instructions are just pictures that don't explicitly tell you what to do with some of the components in the box.I may return it for a replacement or go with another brand since I got a bad deal on the fans.

This is the second LCS I have ever used. It replaced my Corsair H60i which failed after 3 years. It was one of the most difficult components I have ever installed. However, it performs much better than I expected. I'm running an AMD 8120 FX Black Edition, and was seeing temps between 25C & 65C, under load. Since installing the CM MLR120R, I have not seen the temp get above 30C, under load. The average temp is around 10C (+/- 5 C).

This at first look like a fairly cool cooler but once it arrived and I started to put it together it proved very hard to get everything put together along with once I had gotten it put together only 3 days after having this installed on my cpu the plastic piece on the top broke off and caused the cooler to fall of of the cpu while I was using my computer I’m not happy with this cooler this forced me to have to unplugged and unscrew everything just to put a new cooler in I’m not happy with this product but I would still recommend it if this was just a unlucky product I got.

Great Liquid cooler, It keeps the CPU nice and cool from 28c to 38c. Low noise level, you can hear the pump but it's not really loud the fans are quiet. The RGB lights are cool with all the different settings for the light display. I installed it in about 45 mins.