JONSBO/JONSPLUS Z20 White Micro-ATX Mini Tower Pc Case,with Detachable Carrying Handle, Mini Size, High-Performance Hardware Compatible, Support 240AIO, H160mm Cooler, White

Best! One of the most compact yet decent Case. Has everything you need. Awesome cable management on this. The handle is just soo sturdy and even when filled with heavy components the place where the handle hooks to does not bend. Product is 5 star but Seller spikes the price sometimes so 4 star.

This is very well packaged with all items and explanation of best steps for installation. It is all set out so nicely.

Built a Ryzen 5 9600X cpu with a Gigabyte Aero 5070 gpu. Noctua NH-P1 cpu cooler. Gigabyte B850M Aorus Elite Wifi 6E Ice motherboard. Lian Li SP750 PSU. WD Black SN850X 4tb nvme ssd. G.Skill Trident Z5 Royal Neo CL28 2x16gb RAM Kit. Phanteks M25G2 2x140 mm reversed, 2x140mm standard, and a 1x120mm standard fans. Finally a 5.2 inch IPS screen found on amazon via Jalzdieod brand (sounds weird.. worked flawlessly). I love it. Has a handle. Everything fit perfectly with some planning and effort. Check pcpartpicker and the manuals for sizing. I really like the Jonsbo/Jonsplus style. They have many cases to check out. This was my favourite due to it being the smallest mATX I could find without being some expensive small batch special order thing. I highly recommend as it was fun to build in and had just enough space for everything I wanted to put in for a mobile PC build to game on. It weighs as powerful and sturdy as it feels!

Llego rápido muy bueno el gabinete excelente 👌 tiene una placa base asus tuf gaming b850m y una rtx msi 5070 inspire de 12g ryzen 5 5600x

I just wanted to give a shout-out to this brand and their product before I build (orange version). Though I had never heard of them before, they seem to know what they doing and have an intuitive grasp for how to effectively blend Form and Function. I've uploaded some photos from the unboxing, one which includes a view behind the removed side-panel and an example of their cable management accommodations (though there are more within the case body). This 'use-case' is for a small video production studio and I needed it to fit on a short-scale skinny table that I'm using as the desk, which would also snugly house my micro-ATX motherboard. Needed room for the camera and the lights, afterall! Honestly, it's a lot nicer than I was even expecting - particularly for this price. If you were on the fence about grabbing one before they run out, I'd highly recommend it! (Will upload more photos and commentary once the build is complete) ==== UPDATE: Well, my view on the manufacturers and designers of this product have not changed, but have actually improved somewhat - or let's say, I was pleasantly surprised. I have seen some reviews stating that the instructions are not clear. I emphatically disagree. They ARE minimalist, but you can tell a lot of thought went into the point of view of the person reading the instructions, and how they were laid out, such that an average builder could mostly understand and not have to guess. They label ALL of the screws and components with their own alphabetic letters (pictured), separate each piece-group into a bag with the letter actually printed on it and, they provide spare parts of which I actually did need one - and even give you multiple arrangements for how to hang your power supply. I was able to follow the instructions from beginning to end and I actually haven't done an in-case build for a long time. My last build was a TEST BENCH and you can see some photos for that if you look at my other reviews. SOME THINGS TO CONSIDER: The quarters ARE tight in the case of a Micro-ATX, particularly at the bottom of the case (pictured), in that there isn't much clearance between the mobo and the case itself. This was only an issue when I attempted to connect the front panel wires included in the case. Speaking of which, you want to make sure your motherboard has the USB-C front-panel pins on it (wire is pictured), because mind didn't, and now the wire is just kind of hanging-out! (not their fault) But even these wires are labelled as well and the directions are very clear on which is which, as they're all differently-sized as well. That being said, you may want to connect such components as may be required to interact with any of the pins on the bottom edge of your mobo BEFORE you screw it into the case, it just might be a little bit more difficult to get to afterward. But not impossible. I stand by my assessment that for this price range, and even significantly above it, this is a very well-designed and sleek product, as well as being thoughtfully put together and presented to the customer. I will upload some additional photos of the bags and the instructions for now, and when my lighted fan finally comes in, the finished build. For now, I'm just raw-dogging it with the Heatsink block, but no fans (except the PSU)! And yes - it still works. My temps stayed in the 40-50 range at most, and often far below. Pretty amazing, actually. (note on PSU: I am NOT using a modular power supply unit on this build, repeat am NOT, and yet I still had room for all the cables in that little management cubby on the back which is pictured. So even if you have a power supply for which you cannot remove/obviate unnecessary cables from the brick, they still managed to all fit here. And I will add that to my pictures when the fans arrive as well. Thought that might be something worth mentioning.)

I bought this case for a new build and I love it! I put an Asrock B550M Pro4 in mine and it's a good match. Pros - Very, very high build quality. No sharp edges, all the metal is powder coated. Nothing flexes and the whole case is rigid and not wobbly. It's a tank! - Almost every surface has ventilation. - Easy to access all the internals, the front and back panels come off and the fan/AIO rack slides out, as does a bracket holding the PSU in place. - Carrying handle is a game changer. - The "construction site yellow" and black color is really visually striking and looks great. Cons - Not a lot of good options for mounting HDDs or SSDs. In an all-NVME build you are fine. There's mounting room on the bottom but that's where fans, PCIe cards, and cables go. I had to put mine in the channel near the top which can be for wires or two SSDs. While it can do one 3.5" drive and two 2.5" drives I think the most likely use case is one or two 2.5" drives in the top area only. - The blue power light is BRIGHT, like light up your whole room bright. No way to turn that off unless you modify the front panel cable connector I suppose. - I felt my motherboard's I/O panel sat a little bit higher than the motherboard, but all the standoffs were the expected 6.5mm so that wasn't the issue. It could have been either an issue with the I/O panel or the case's panel area might be setting like 0.25mm too high. That said, all the ports are usable and I could have just remedied this by bending the I/O panel tabs to make it sit lower. I really like the visual aesthetic and sturdiness of the case. Now that it's assembled I'd never want to get into it again to change anything because the compact design means routing things is tough, but once you're done, you're done!