ELUTENGCharger for Google Pixel-Watch,Repalcement USB-A Upgraded Fast Charging Cable Magnetic for Google Pixel Watch,Black/White

The media could not be loaded. This review won't be long because these simply work very well. In the picture of three cables the stock one is on the far left. You can see that they follow the same basic features as the stock cable that comes with it minus the fact that these are USB-A to Pixel Charger rather than USB-C. For me this is what I wanted because of my charger setup. I did attach a video but I could only add one so it shows one of them connecting to my Pixel Watch 2. I did test all three on video to show that they work but none gave me any trouble in the past few weeks. I do note a slower charge rate but considering I'm not using high speed charging so this might be on my side. Magnet is good though and the cable is about 3 feet long for those that need to know. I would say I have no hesitation to recommend these for Pixel Watch 2 owners!

The cords do not work to charge the watch at all. They seem like the spring in them isn't working so it doesn't connect, and when it tries to charge ends up draining the battery further or taking hours upon hours just to go up a few percent. The magnet strength might be the issue. They're not a good value for the money since they don't work and do not seem durable even if they did. Overall a very bad product that I wish I hadn't wasted my money on.

Purchased these cables as a backup for the original cable and also to have around the house. I have more USB adapters that still use the USB-A type connector and this makes it easier to use in most locations as there still aren't USB-C charging ports in many locations.Initial impressions of the cable is that its a bit thinner than the OEM cable the comes with the watch as well as the general build quality a bit less. I'm using this with a Pixel 3 Watch, which uses the same charging pins as the Pixel 2 Watch.I've used products from this brand in the past without issues but I'm running into charging issues with a few of these cables. Plugging them into a USB ammeter, this allows me to check the charging rate compared to the original cable and found that only one of the cables match the charge rate and consistently charges when plugged in. The others either charge at a very low rate or not at all and jiggling the connector on both end doesn't make a difference. When plugged in, I'm expecting it to charge at .5A but they mostly charge at .05A and that's not really usable.Going to reach out to Amazon to see if they can replace the defective cables and see if I can get a fully working set, but if you get a good set, this is an amazing value compared to the OEM cables, but that would depend if you have the time to test out the cables and verify they work as expected first. Most of the other cables listed online appear to be from the same manufacturer as well as they are all reporting the same issues. I do hope they improve their QC in the future.

These don't work reliably, if at all. I often put my watch on to charge and later find that it has charged very little it not at all. Would not repurchase.

This charger works well and provides a fast charge for my watch. Only takes about 30 mins to charge from less than 10% to full. Keep in mind that the 2nd gen Google pixel watch does require the prongs on the charge cord and the 1st gen does not. A 1st gen charger without prongs will not work on the 2nd gen watch and vice versa.

The charger head does not fit properly on the back of the watch, so adequate contact for charging is not possible. Item will be returned. 😔 Poor rating is based on this fact alone. It very well may work on a different device, but not this one.

Works good

I love that this is USB-a!! I didn't realize that when I bought it, but that makes it more compatible with a lot of my charging plugs and stations. It still charges fast while my biggest problem is getting my watch positioned well in my car's crowded "junk tray" so it stays connected. I think the magnet connection isn't quite as strong as the original cord, but it still works well and would probably be an unnoticeable difference if sitting on a flat desk.