LVDs Controller Board 30 pins m.nt68676 for 17" 19" 1280x1024 M170EG01 M170EN01 M170EN06 M170ETN01 1 LCD Gaming Screen Panel

The board works like it should. Make sure you have a power supply as it doesn’t come with one.

Perfect for home brewing Arcade1up

The media could not be loaded. Did a diy project. Installed a lcd screen on the side of my gaming pc… this was perfect for what I need.. has everything on it I needed hdmi output and connected for lcd screen to power on.

UPGRADED MY PINBALL MACHINE BACKBOARD THIS WORKED OUT AND FOLLOWED A FEW VIDEOS ONLINE TO GET IT WORKING.

Shipped and arrived very quickly. Works perfectly out of the box. Just follow directions on ETA Prime video for Arcade1up.I wanted to offer my experience with the buzzing / no audio some people mentioned. I had the same issue. The problem is not with the LCD driver. It's a configuration setting in the Pi. I had to add a line to my /boot/config.txt file to force the audio to the HDMI output. If you search online for "retropie no hdmi audio" you'll find the answer. There are 3 lines I had to uncomment or add in the file to get the HDMI working. Apparently, the Pi doesn't recognize this HDMI board right off and has to be forced to output HDMI video and audio in the config.txtFor the audio I had to add the following line:# May not be needed for all HDMI deviceshdmi_force_edid_audio=1That got my audio working perfectly.Also, be sure to use the audio jack on the far right of the board.

I purchased this following the same guide everyone else is commenting here, and modded a rampage cabinet to run a raspberry pi. Works great, and has been running for about a week now without any issues. The only thing I wish was the wires being just a little longer, but I mounted it above the screen and it's working great!

I used this to modify my 1up Arcade, and then sold the arcade for a nice profit.The device worked wonderfully.The monitor is Model # M170ETN01 1.If you are using this monitor with this adapter, it will work great. The power supply on the 1up will fit into this adapter. Hint, the red wiresm go on your left side with this adapter and the 1up M170ETN01 1.The white ribbon wires will stay in the same place (these connect to the board with the buttons)You can ditch the other part as it is not needed with the 1up Arcade.Please check the model number of your monitor to assure compatibility. Not all monitors in the 1up have the same model number. I included a picture with the monitor (model number clearly seen) and the set up I used. Note the power plug, in the picture, is not in place.

I recently purchased a Partycade Arcade1up (PACMAN 40th Anniversay) and needed to check if the monitor was working. The connection was not difficult and I was able to connect a dvd player to the monitor through HDMI.If you would like to connect other devices such a SNES Mini, Retropie, etc., they will work as well. Also if you need an extra video output, for a secondary screen or Elgato, I assume it will work too.I am satisfied with the purchase and the product worked for what I intended for.