FREDBECK 30in x 80in inch Glass Barn Door with 5.5FT Barn Door Hardware Kit Included,5-Panel Frosted Glass,Wood Panel,Water-Proof Surface,Need Assembly,Fit 27in-28in Opening

The door looks like real wood, you can not tell the difference. The hardware was well constructed and becaause it came in two pieces with the connection piece, it saved us because our wall was not straight.The door moves easily, Fun to install with your wife. Hanging it will take two men, its heavy. I had to instal a 1X1 inch Block of wood about 1.4 inches on the floor to lock in the bottom roller. Any man can figure that part out and simple. Our opening was higher than a normal door and 43 inches wide, and this door was eactly 48 inches wide and fit perfect. IT takes two men to lift it in the home, and lifting it is not bad, just awkward because its a long box. All harware came with Lag bolts for the header board area, and Drywall anchors for the dry wall for decorative purpuses on the roller bar. On mine I drilled a new hole through the metal barn door bar hanger where the door rolls on it. My studs did not match up to the holes there were pre driilled. Drilling through that bar is not a problem and I jsut moved one of the dry wall lag bolts to that new hole and screwed the bar in for the support I needed to the stud. Then emailed the seller for a new bushing and bought a 5/16 black bolt and drywall anchor to install where I moved the drywall lag bolt. This part is common sense and not hard. I had the tools I needed. Very few men would have a problem wiht this extra step, its not hard.Overal we have been using it now and love it. We hope you do as well.

These are beautiful doors , just installed them and was pretty self explanatory, very very nice , great job seller and thank you 🙏 love the glass it gives light and keeps the door from being solid and gives it something more, Elegance !

This door is heavy! And so pretty. The only issue that we had with the door itself is the nicks in the finish upon arrival. Little tiny gouges here and there all over it. Wouldn’t be such a big deal except a few of them are right at eye-level.Make sure that the bottom piece, where the track for the floor guide is, isn’t put on upside down. 🙃There is a 1” gap around the door. We added a 3/4”, dense window foam strip along one side. In our case, the other side didn’t need it because of where the door is. Doing this probably wouldn’t look so good if you need it on the side where the door opens from. We also had to modify the foam piece to allow the bolts at the top of the door to pass through when closing.Overall I would buy this again and will be when I redo my bathroom door.

Love my new barn door! Once you get pass the many fractions and whether or not your builder did a good job on your floors, it’s an easy install. It looks great! I want to change out my front door to match this barn door. We needed a back board. Finally finished painting the back board today!

These doors are beautiful. They are heavy, solidly made, come with heavy sturdy hardware. My contractor was very impressed and surprised how inexpensive they were. He thought I paid over $600 a piece. Highly recommend.

The media could not be loaded. This door is absolutely stunning. Durable, high quality, and gorgeous. Heavy, high quality door. Was really easy to put together. No missing pieces and no other things had to be purchased to put it up.

This door came well packaged. Directions were easy to understand and follow. The door is heavy and well made. Purchasing another door as well for a bathroom.

They seem nice. They aren’t much cheaper than what you can get at Home Depot for almost the same item though and unlike the Masonite Barn Door Kit, this did not come with trim board for behind the mounting bar, and that made me pretty angry. Because that costs an additional $50 unless I buy unfinished pine board and that won’t match. So this was an expensive mistake and I will not be buying more. You cannot return these if you don’t like them because they come disassembled and won’t fit in the package after you build them. You’re probably better off buying the Masonite kit in light of this. You need the extra wooden support for doors that are this heavy or they will sag over time. It also doesn’t look as clean at the end.I am 5’ 4”, about 120lbs and I was able to assemble them myself. If you choose to buy these you also need a rubber mallet to get the pegs in the the pre bored holes. A regular hammer would probably compromise the glass or shatter it.