ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), 2KG Texture Grey+White

I’ve had a great experience with Anycubic PLA filament. It prints very smoothly and consistently, with nice, clean layers and strong results. The filament feeds well with no tangling or clogging, and the colors look great once printed. It works perfectly for everyday projects, from simple prints to more detailed ones. For the quality and price, this filament is definitely worth it and something I’d buy again.

If you’ve ever fought with inconsistent filament, brittle spools, or endless re-leveling nightmares, this ANYCUBIC PLA bundle will feel like a revelation. I’ve run these through my Kobra 3 Max and Kobra 2 Pro, and the prints come out buttery smooth every single time. Layer adhesion is flawless, stringing is almost nonexistent, and the colors have a beautiful matte-to-satin finish that makes every model look professional right off the bed. What really stands out is how consistent the diameter is — no weird jams or under-extrusion here. The spools unwind cleanly, the filament stays dry thanks to the tight vacuum seal, and the labeling on each roll is crystal clear (a small detail, but one that saves a ton of time when you’re juggling multiple colors). This 4-pack bundle is also an unbeatable value — it feels like you’re getting premium filament for a mid-range price. Whether I’m printing detailed miniatures, mechanical parts, or large-format prototypes, this PLA performs like a champ. If you’re on the fence, stop scrolling and just hit Add to Cart. ANYCUBIC nailed it — this is easily one of the most reliable PLA bundles on the market.

Great price and no issues printing with it.

I bought the white PLA filament for my Bambu X1C. The generic PLA setting had too high of a temperatuer (240C), but once I lowered it down to 220C the prints came out beautiful with no defects, stringing, or other issues. This is normal for Bambu which tends to use a slightly higher temperature due to the printing speed, so this is not the fault of the filament at all.

Great filament but their plastic spools do not fit the Bambulab AMS Lite.. The hole is so large that they even fall off spool holders. Honestly I don’t know what spool holders they can fit other than custom ones. Added they are not even reusable so they are literally garwhen done. However, they do function fine in my X1C AMS, but it’s annoying to buy from 2 competitors just because of this. Hoping that Anycubic addresses this.

The filament PLA from ANYCUBIC printed very well. My first prints were beautiful, even my own designs. one problem I had was Tangling in the ACE Pro. I have since design a De-tangle Gig to fix that. I am waiting on a shipment of Filament to print it, test it etc. This is my first time with 3D printing. ANYCUBIC Kobra S1 Combo is my First 3D printer. Very happy with it. The Printer is beautifully supported with the Slicer Next, very good Programming Support. I am looking forward to the S1 Max.

This "two" pack only came with the red filament. The box was listed as 2 x 1kg of filament but the box only had the one spool in it. Update : Anycubic remedied the situation and sent me the missing blue PLA.

I'm pretty disappointed with this filament. I've had more print failures with this than any other PLA filament including some very old reels. It seems to be unable to print any large flat areas without gumming up and clogging the nozzle. It won't print a simple temperature tower as it binds at 190C, but I've experimented with different temperatures without a lot of success. I will use it for some small items which it seems to do OK on but can't trust it for anything unattended or large-scale. (one of several failed Benchy prints shown) Update: The supplier was very responsive to my review. They offered to send a replacement roll which seems to behave quite a bit better. One thing I've learned is that this filament seems to require a higher temperature than most PLAs -- I can't print a temp tower starting at 190C but seems to work OK at 205 and optimally at 220. I'd still rate this as a bit fussier than other PLA filaments but adding a star to reflect the customer service and the fact that I am able to get satisfactory results at higher temps.

Sehr gutes Filament, welches sauber gerollt ist. Es verstopft die Düsen nicht und ist perfekt geeignet für meine Anycubic Drucker.

Das Material ist einfach super

Relación calidad precio de lo mejor que se puede comprar.

Magnifique jais imprimé le nom de mon bateau pour le coller sur la coque extérieur ça n’a pas bougé et reste super brillant

Ich habe dieses 4 Kilo Filament Set zusammen mit meiner Kobra 3 Combo bestellt um direkt richtig Gas geben zu können. Das Filament lässt sich super drucken und Sachen wie Druckbetthaftung etc sind kein Problem. die Lieferung war wie immer zügig und ohne Mängel. Mein Vorrat an Filament ist vorerst gedeckt, da diese Set mit vier Kilo sehr lange reichen wird. Bei 210° und 55° Betttemperatur sind die Ergebnisse 1A. Der einzige und ganz großer Nachteil ist das bei der Bestellung in der Beschreibung stand man bekomme, dass Filament auf Rollen, die von RFID System erkannt werden, allerdings erkennt weder der Drucker noch die Combo eine der Rollen. Somit musste ich alles händisch eingeben, was beim Wechsel manchmal nervig ist. Mittlerweile steht auch in der Beschreibung nichts mehr von RFID Chip, was ich sehr seltsam finde, wenn ich den Drucker jetzt neu bestellen würde, wird, als könnte Ihnen auch gefallen wieder die Papprollen mit RFID Chip angeboten. Ich weiß nicht, ob hier seitens Amazon etwas schief gelaufen ist oder einfach nur ältere Ware verramscht wird. Nichts desto trotz lässt sich das Filament sehr gut verarbeiten.