Surecom Mcbazel SR-628 Cross Band Duplex Repeater Controller with 2 x K Plug 46-K Cable for Kenwood PUXING WOUXUN QUANSHENG

It works well, but to get it to work correctly, you will need to configure it. Here's what I did: 1. Someone on youtube posted a video where his SR-xxx repeater would only work if he was talking into his radio. I had the same issue. I noticed the SQL setting (code ##55) in the documentation and set the squelch level on the repeater as low as it will go (1). Out of the box, it's set at 5. This fixed the problem and the repeater now works perfectly. 2. Obviously, change the password. 3. I changed the repeater mode (code ##612). For my purpose (ammo can repeater), I could have gotten by with the SR-328, but for the couple of extra $$, it's not bad to have the cross-band capability should the zombie apocalypse ever come to pass. It seems like a pretty decent unit. Simple and straight forward. It does what it's supposed to do. It doesn't have too many lights that burn power needlessly, yet it has enough to communicate the necessary codes back to the user. Time in the ammo can will tell.

Nice

Can’t be any easier for mobile emergency comms! Just plug in and go! The built in battery is great when you need it but can also be charged/powered via USB with a battery bank etc! HIGHLY recommend as an addition to your emergency comms equipment!

Does not work. Bad cable only works one direction. Total junko

This little box actually works pretty well. I used it with two Baofeng radios. I still have not gotten the audio levels quite where I want them, but it does work. It basically switches audio - there is no radio frequency involved. That is handled by the two radios. Both radios have to be in the VOX mode to make this work. You will have to experiment and the instructions are far from helpful. Nevertheless, I set it up for a UHF simplex input and a VHF output to control a local repeater. After a couple of false starts I got it working in both directions. The audio is controlled by the volume control settings on the two radios. The box has a rudimentary VU meter via an LED display. Still working on this setting. Worth a try if you need a temporary cross band repeater.

I tried to make a repeater with 2 radios. I tried to use 3 different connectors but could never get them to function properly all the time. I bought this, plugged the radios in and BOOM! Worked exactly as expected and continues to work properly.

Using to extend base antenna coverage throughout my property.

As described

Très bien merci

molto soddisfacente con 2 polmar portatili ..Consignato

Buen calidad, cumple su función perfectamente

Det jag har testat fungerar som jag tänkt, den kommer att byggas in i en låda/väska med två Baofeng UV-82 och batteri/powerbank med chassikontakter för yttre större antenner för att öka räckvidden och dessutom få större avstånd mellan antennerna! Rekommenderas!

The device arrived intact. Trusted dealer. We are testing it as a PMR and CB pass-through, so far so good. I can't give a detailed description yet.