atomberg Renesa Enzel 1200mm BLDC Ceiling Fan with Remote Control | 5 star Rated Energy Efficient Fan | High Air Delivery with LED Indicators| 3 Year Warranty (Dark Walnut)-Newly Launched in 2025

Writing this review after almost 5 years of use. Nothing to complain with the fan or the remote. Great Airflow, Reasonably low wind noise and Easy to clean blade surface. Perfectly satisfied. Have installed 7 more of the same fan after this purchase. Power consumption is around 35 watts with a power factor of 0.65 Only thing I would like to see improvement is the power factor. Great Keep it up ATOMBERG.

I bought the Atomberg Enzel ceiling fan primarily for its energy efficiency, and it has truly delivered. The BLDC motor consumes very little power—even at top speed—making it a smart long-term investment, especially for areas with frequent fan usage.What impressed me even more is how silent the fan runs. Even at higher speeds, there's barely any noise, which is perfect for bedrooms, home offices, or anyone sensitive to sound.The remote control adds convenience, and the fan’s sleek, minimalist design enhances the room’s aesthetics. It’s also reassuring to know I’m saving on electricity bills without compromising on performance.Highly recommended if you're looking for a power-saving, noiseless, and stylish ceiling fan.

Very good quality ceiling fan. I have been using it for 2 years now. It has 6 modes with very fast air flow. It's very easy to use and saves more power than usual ceiling fans.

Air circulation is very good. It comes with all required functionality. Also comes with almost all common colours. Really a good bldc fan. It will be truly satisfactory if worranry period exted upto 5 years.

I recently purchased 3 nos of your Renesa fans, through Amazon.As I like to dabble in mechanical fitments of domestic appliances, I did the entire fitment myself. In 3 of my bedrooms.Following are my observations.Cons -1.h The instruction manual has many grammatical mistakes and it takes away the sheen of being an Indian product. I know we Indians lack in finish. It just buttresses my observations, sadly.2. You have thoughtfully provided a safety cable in the box. But, the instructions on how to use this appropriately and correctly, are very confounding. A step by step diagrammatic installation procedure would have been very helpful. Take a Japanese manual as an example. They simplify it through cartoons and make the entire understanding process so much easier. You have tried to keep it concise and short, almost hurrying the process. Whereas, more real estate should have been provided when it comes to a safety application. Which end should actually go where and what should be anchored to what, is really puzzling.3. The down tube has so many sharp edges that it cut into my wires repeatedly. I had to install new sets twice. At every opening provided, top, bottom or at right angles, wherever there was an opening, there was burr. Sharp burr. This is downright deplorable as it is a safety issue. If you acknowledge it to be, that is. I know de-burring is very menial job and does not come into the grand scheme of all things manufacturing. But it can make or break many a product. Please look at it very carefully.4. The down tube can have a small plastic wire or a more environmental friendly string pre-attached to it. This will help in routing the electrical wire from the connector of motor to the connector of the power input. Small things matter.5. The hardware provided, nuts, bolts etc. are not of good quality. Though the yellow zinc plating seems good. The holes for the split pins are not deburred (there!). The nuts are not concentric to the threading, which as a result rotate eccentrically when rotated on the bolt prior to tightening. This will mean that it will not fit flat or at right angles to the axis of the bolt, rendering tightening, suspect. The split pin is the only savior. Hopefully.6. The paper tape applied on the motor body as a soft medium between the blade and motor, tears off easily. When the screws and spring washer are removed, prior to mating the blades to the motor. The spring washer digs in too much into the paper tape.7. When one turns on the fan, via remote, there is sound and then the fan starts rotating to the desired speed. Trust this is normal and not a cause for alarm.8. Have the fans been dynamically balanced? The reason for this query is, one of the fans does an orbital motion around its anchoring point. I double checked the shackle and all joints for proper fitment. Do tell me about it.Pros-1. Surprisingly small and light weight motor. Pleasure to hold in one's hands. Hope it lasts well. My older ceiling fan has lasted me around 20 years and still working well. Had to give it off in exchange!2. Because of the smaller diameter motor, the blades look longer. Gives a wider/larger sweep look.3. Remote works very well and is very convenient too.Hoping the Design and Manufacturing team will look into these aspects

Fan speed is not good. Comparing normal fans fan speed is low.Not satisfied. Led lights are dull.Normal switch board regulator works fine with this fan. No need to use remote.. Remote is just for led lights on & off, speed control. Boost speed shows no difference.Rate is higher. Fan Speed could be better.

This fan is powerful, quiet, and easy to use. It cools the room quickly and the oscillation covers a wide area. I love the sleek design and how quiet it is—even on high. Highly recommend!

The Product is Good. There is sound at 4 and 5 speeds not as claimed by the Company. Inspite of booking with the Company for installation no one turned up. I waited for five days and then had to install from Amazon service at a very high cost. After sales service response is simply horrible. Please go for other brands.