R-120SW Subwoofer, Black

Personally, I have always liked the great sound, quality, unique "copper" look, and relatively low cost of Klipsch speakers. This great R-120SW subwoofer is no exception. This subwoofer was delivered well packed, and in perfect condition. This subwoofer also works perfectly with absolutely no 60hz ground-loop hum, distortion, cone snaps, crackles or pops, or chuffing out of the rear port. This subwoofer also runs cool even when pushed to higher volumes for extended periods. Overall, I am very impressed with this subwoofer. I am sure it will last many years, just like all of the rest of Klipsch's great products. I purchased this subwoofer to replace a (still working great after 12 years) Pioneer Andrew Jones Designed SW-8 subwoofer. I was just looking for a little more low-end frequency for movies and music, and boy does this Klipsch subwoofer deliver. The 100 watt, 8" Pioneer subwoofer only produced frequencies down to 36hz, while this much larger and higher powered Klipsch subwoofer goes down to 29hz. I now hear and feel bass I had previously been missing with the Pioneer subwoofer. My main home theater system now consists of 5 (also 12 years old) original Pioneer Andrew Jones Designed speakers (2 floor, 2 rear surround, and 1 center channel), this Klipsch subwoofer, a Denon AV receiver, and a Samsung 4K 65 inch OLED television, and they all work seamlessly together. I recently upgraded the stock, weak tweeters in the otherwise great Pioneer speakers, with Goldwood GT-520 silk dome horn loaded tweeters, and that made a huge difference in balancing all of the frequencies from high to low. The tweeter upgrade, along with The addition of this subwoofer, really completed the sound I was looking for, as the Pioneer speakers sound great, but tend to be a bit midrange focused, out-of-the-box. This Klipsch subwoofer is really easy to setup. Unpack it, place it in a corner, plug in a good quality shielded subwoofer coax cable from the sub-out RCA jack on the back of the AV receiver to the white LFE RCA jack on the back of the subwoofer. Then plug in the power cable, turn on the AV receiver and subwoofer, and wallah, there is bass. I have the gain set to just past half way (after using the AV receiver speaker calibration), the crossover set to LFE, the phase at zero, and the power to auto. I initially ran the auto speaker calibration setup in the Denon AV receiver to match the sound to all 6 speakers, and it did a great job. I have the subwoofer and all of the speaker crossovers set to 80hz, per THX standards. The subwoofer is also set to "LFE+Main" in the AV receiver, so it works equally well with movies, TV, and music. It's hard to describe how amazing this home theater setup looks and sounds now with this new Klipsch subwoofer. The only "drawback" I would say this subwoofer may have is that there are no high-level in/out speaker connections for connecting it to an older amp, or a small portable amp, using standard speaker wires. However, that omission won't really affect most users. I highly recommend this excellent Klipsch subwoofer for anyone looking to build or upgrade a home theater and/or music stereo system. The retail price of this subwoofer (and all Klipsch speakers in general) may be a bit steep for some individuals' budgets, but Klipsch speakers are ALWAYS on sale, and steeply discounted everywhere. However, In my humble opinion, you really can't go wrong with Klipsch products at any price. Buy this great subwoofer now! No, wait, buy 2 when you find them at a great low price!

Deep, powerful bass that extends well below the 29 hertz frequency response listed in the specifications as suggested by Klipsch. I reluctantly ordered only (1) R-120SW subwoofer to pair with my set of Klipsch's The Nines. (I'm so done with soundbars and wanted a relatively simple yet well rounded setup for my living room. The Nines are absolutely amazing and I have zero regrets for "only" going with a 2.1 stereo setup using HDMI ARC from my 75" display for movies and gaming with my kiddo.) I use every input available on The Nines since they perform double duty as our family room cinema audio and for music; the phono, USB for direct connection to my phone and optical input for a CD drive. I'm getting off-point, but The Nines are just unbelievable... So as I said earlier, I only purchased (1) R-120SW for two reasons. Firstly, I wanted to know how it sounded in my room. Secondly, I was unsure whether or not only (1) subwoofer would be enough to seamlessly blend with the stereo image provided by The Nines. I'm certainly glad I only bought (1). This thing gets down low-low for a single ported 12" subwoofer, and sounds damn good for a relatively inexpensive unit. Accuracy and clarity are both above average for a sub at this price point. Maybe I just got lucky with the room I'm using it in, but I'll take it. I've set the low-pass at around 80 hertz, which overlaps well with The Nines. The sound blended seamlessly with the gain set just a bit below half way, and I can control the subwoofer level with the Klipsch application for The Nines. The R-120SW provides immersive, accurate and powerful bass response without being boomy or muddy, and at a great price. The enclosure is well made and measures out to be around 2 cubic feet of volume. As with any rear ported enclosure, this subwoofer performs best when moved away from the wall by several inches. Worth the $300 price point.

Exceptional Sub. Great value fills the room 17x30. Easy install. Would recommend.

I wanted it to work for home theater and music, which seems like a tall order judging by subwoofer reviews, I chose this one due to reviews and it is the most amazing thing ever. I’m writing this hoping it will help someone like me. I bought a Klipsch R-120SW and a Denon AVR-S570BT (Denon connected via eArc to Apple TV), on some sales, and the sub didn’t work at first with a Y cable. I bought the Mediabridge ultra one because I saw other reviews saying it is great. But the sub only put out some deep sound when something crashed in a movie and I had no music sound from it. I wondered if I was using the wrong cable, because the sub manual told me to only use a single ended cable for L-LFE plug. But when I googled deeper, even Klipsch suggested that a Y cable would give me the best sub sound (even though the 3 page sub manual did not say this). So I kept this cable and found info on an “advanced setting” in the Denon. I changed LFE to “Lfe + main” and now everything works, music, tv, all of it. The sound is awesome and perfect. There are other settings you can tweak to your liking in the denon, to change the audio, but I haven’t needed to. I did some tuning with the low pass and gain on the back of the sub to get it perfect and I walked away. No buzz, no hum, just clear, perfect, well rounded bass which made my old, tiny center and side speakers sound like an expensive system with clear mids and full sound as well. You can’t even tell it’s coming from the sub. I’m kind of in shock. Awesome resonant, full, floor thumping bass for rap, hip hop, also perfectly transitions for classical, swing, country, r&b etc. We love all kinds of music and this does it all with power to spare. And when something destroys a building in a move, the floor and couch shake with clear, perfect sound. No near neighbors to annoy. But if I turned up the knobs even a hair on the sub, the far neighbors will also hear my perfect bass. Ten stars if I could, I’m so glad it all worked so over the top.