Dremel 199 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, and Soft Metals

In past 3 years and during the winter that product was got in time and I used this product for carve the metal,plastic,and wood that I need thank you.

ok

I recently built a shelf using about 70 pocket holes and 70 pocket plugs. This time around the wood was Red Oak and so were the plugs. I did not cut the Red Oak plugs down ahead of time which would have made them more flush, but instead I cut the Dremel cutting guide in the "Dremel 565 Multi-Purpose Cut Kit" so I could approach the plugs and used the 194 bit raised to about 1/32 of an inch from the surface. As long as the cutting guide was held flush to the wood it made mince meat out of the plug. To avoid creating a lot of smoke the bit is designed to cut in one direction (although if you force it you can cut in the other direction and create a lot of smoke in the process).Once I ground (routed) one plug down, I was able to use the multi-tool sander to flush sand the remaining amount and then wood filler as needed.I tried using a flush trim saw, but it was a lot work and if you don't watch it the saw can actually cut into the adjacent wood. This router/grinder worked much better and was consistent so long as you kept the cutting guide flush to the surface. For routing on narrow wood I clamped more wood to both sides and made if flush with piece of wood with the pocket plug.This router bit in this application saved me lots of time. Now that I modified my drywall cutting guide, it was time to replace it with a new one i.e. this purchase.

Too small for what I do.

I bought these for my wife and she used them for crafting. They work exactly as advertised.

I purchased these on walnut knife handles as an experiment and it worked out beautiful loved how easy it was to use. My knife handle came out.

Good quality as expected

Used this after a 106 bit for larger lines in carving in maple and hard plastic. Perfect for carving wood and plastic. Sharp and remained sharp. Great to have in a Dremel tool box!