KNIPEXAutomatic Wire Stripper 10-24 AWG, 7.25

It saves me so much time that I have time to write a review! :). It really is very helpful tool.

Best wire stripper around. Makes jobs so much easier.

**Knipex Automatic Wire Strippers, 10-24 Gauge Review****Discovery and First Impressions:**I first heard about the Knipex Automatic Wire Strippers on Adam Savage's YouTube channel, Tested. I usually trust his recommendations, so I decided to give these a try. I have some experience with wire stripping, and I plan on doing a lot more, which is why I got them.**Performance:**These wire strippers are amazing when it comes to performance. They strip the ends of wires perfectly, which makes the process really satisfying. I've even found myself stripping spare wires just for fun. You can adjust how much wire you want to strip and how strong the tension is. Even with small wires, I've never had any issues with snapping them. The tool seems to adjust its tension really well, whether you set it high or low. There's also a cutter on top, though it's in a bit of an awkward spot, but it works fine.**Ergonomics:**The ergonomics of this tool are fantastic. It fits well in your hand with a full-handed pistol grip lever action that's comfortable to use. If you have a lot of wires to strip, this tool makes the job much more enjoyable.**Build and Material:**Now, this isn't a cheap tool. It's for people who plan to do a lot of wire stripping and want to save time. While it's a bit pricey for regular folks, it's worth it if you need to strip a lot of wires. However, it is a bit disappointing that the entire tool is made of plastic. Even though it's durable, I expected a bit more for the price. But knowing Knipex, their products are usually high quality and last a long time, so it's only a minor "annoyance" and I didn't dock any stars for it.**Overall Thoughts:**These wire strippers are a joy to use, which is surprising to say about such a tool like this. They're high-performing, likely to last, but come with a higher price tag. If you need to strip a lot of wires, these are worth considering. But if you're not sure if you need them, you probably don't.

Just a great addition to any shop. Easily adjustable and very simple function.

These have been working great since I got them. I mainly use them on 12 and 14 gauge Stranded and Solid THHN wire. The depth gauge on it works well for what it is but can be a little finicky to get set. I have not had any issues with it not stripping a cable yet

I had tried other "automatic" strippers and had very limited luck; with THHN wiring they often pulled the clear protective coating off the wire rather than strip it, but several people told me I HAD to try the Knipex.Long story short, these work absolutely PERFECTLY. They strip the wire, they don't leave a groove in the wire like some other automatic strippers do, and as a whole work the way you think an automatic wire stripper SHOULD.Highly recommended.

The first impulse to buy this tool was:I have a similar unbranded stripper that is nearing EOL, the knives are getting dull.Knowing Knipex through decades as a manufacturer with a reputation for quality tools, I assumed I could not go wrong with this wire stripper.Wrong I went.First impression is that it is smaller than expected. Next I find that the "business" components like the pull-back slide that look like grey metal in the picture actually are some composite plastic material. On further inspection, there are just a few metallic parts made from stamped and layered sheet metal in this tool, nothing solid here, all components are optimized for low production cost, as opposed to rigidity and durability.The most disappointing moment: I try to strip an AWG 10 THHN wire, and the tool is incapable to do the job. Initially, the knives ride on top of the insulation and just scrape surface, nothing else.Applying some force on the jaws to get a deeper bite into the insulation stops the scraping, however, the knives do not cut the insulation, instead, they try to pull the barely cut insulation off the wire. Certainly, the nylon cover on the THHN is tough stuff, but the tool was advertised to handle AWG10.At this point, the plastic handle is bending to a degree where I might break the tool. It feels spongy, and although I apply quite some force, it plain just does not cut it, even trying to rotate the knives around the cable.So for that part: Forget all about stripping AWG10 THHN wire with it. No friggin' way.I later tried it on much softer rubber insulated cable ranging from AWG22 (CAT5 Network Cable) up to AWG 12 - with better result - but that is NOT what i needed this tool for.It's just too sad to see yet another reputable German toolmaker cut corners in terms of quality and slowly going south. This tool is disappointing, specially looking at the price tag.

Works fast as long as wires are straight. I prefer to use it if I have a lot to do or have it handy. I previously bought a cheaper off-brand and returned it for this which is now a permanent resident in my essentials "ladder" tool bag. You've got to be essential and light if I'm gonna be carrying you all around the house or up any ladders.