GLS Audio Twist-Lock Speaker Plug - Speakon Connectors, 4 Pole, 4 Pack

These are solid, high quality connectors that are extremely easy to install and function flawlessly. Be certain to use the Black stress relief insert for larger diameter cables, or the White insert for smaller cable. The ease of movement of the latch seems affected by the degree to which the rear Blue clamp is tightened when screwed on. The outer casing of the connector (containing the latch) serves nicely as a wire stripping gauge: Use the length of the larger diameter portion with the latch for stripping the outer rubber jacket Use the length of the smaller diameter threaded portion for stripping the wires themselves. I recently purchased a 100' 12AWG speaker cable, cut it in half, then cut one of the halves in half. Utilizing these connectors, I now have two 25', and one 50' speaker cable... which means that (with a Male-Male connector added), I have two 25' OR two 50' speaker cables at my disposal.

I'm a former pro audio contractor & touring engineer. I own a couple of DJ dance clubs and still do all my own sound work. These Speakon compatible connectors do a great job and save money compared to the big brand. I've used them with 12, 14 & 16 gauge wire & all work great. I like that phillips screws that are used to secure the connections.

I needed speakon ends for my stage monitors and knew making my own cables was the best option. 30 and 50 foot cables were way more than I spent making my own! The GLS Audio plugs were a perfect match to the monitor inputs and are very well made. They came with two different internal cable clamp sections to accommodate large and small speaker cable. I have another install coming in the next few months and will be buying more. Great price, excellent quality!!

I don’t have much basis for comparison since this is the first time using SpeakON connections. The build seems solid and they work great, it was easy to put them on the cable ends. I can save some headaches for others. The labels on the poles are really hard to see. Magnification and really bright light makes it possible. The photo shows the position of +1 and -1, they are the two with screws facing up on the same side as the wider raised tab at the end with +1 higher up on the right.

These are good quality speakon connectors. I had a 50ft 1 4 GLS cable. I cut the 1 4 cable in half to make two 25ft cables. I put the speakon connectors on 1 end and left the 1 4 cable on the other. Couldn't be happier. The plugs work as they should they are very easy to install and they have 2 positive and negative connections for bi amping. I have had success with gls products in the past. I highly recommend these. When it comes time for me to upgrade my amp rack I'll be making patch cables with gls wire and connectors for sure.

A quality product for a price that is flat out unbeatable. I had an issue where one of them had a clamp that was melted from the factory, so I contacted GLS directly through the Amazon seller option. I did not request anything, but wanted to let them know what occurred so they would know. The connector worked fine, it was just the black clamp for heavy wire that was the issue, so I didn't make a fuss. The GLS Owner contacted me within 48 hours and apologized and told me not to worry and that I could toss the defective one and he would send me a new set. To Say the least I was floored. I have never had such great service from a company, and to find out they are a family owned company! I will never forget this, and after experiencing the quality and affordability of GLS products and being in the industry for more than 28 years, I will continue to be a customer and strongly recommend them to everyone in the industry.

These generic Speakon connectors work great. They may not be quite as good as the originals, but they make a lot of sense for enthusiasts. The price is right. The build quality is fine. And they are very easy to use. If you're on a budget, you can't go wrong with these connectors. I used them to create cables for my Behringer 215XLs. They work great!

These compare pretty well on the road, but in the shop they’re a bit finicky. They snap into the jack very nicely with a satisfying click, but the boot has threads that are so tiny that they get stripped when you apply even the slightest amount of force. I’m using 14/4 rubber cable with these and the white strain relief (the black one is for much thicker stuff), and I can barely get the strain relief to bite down on the cable because the boot keeps slipping off its threads.