S.R.Smith 67-209-911-SS Residential Diving Board Mounting Kit, White

Quality of item was superb! Delivery was exceptionally quick. The packaging was very, very nice.

As many who have reviewed before, it's overpriced, but then you don't have to go to multiple sites/locations to put the kit together yourself; trade-offs. This kit had everything that I needed, and my original bolts were very much like those shown in pictures below; heavily rusted and had to be cut off. I also replaced the 1/2" brass nuts with Stainless Steel AND bought some anti-seize compound. Overall, this product quickly satisfied my needs...

These worked perfectly. Don't over torque them. They need to let the board bend and spring. I replaced my board bolts and fulcrum after 35 years. I should NOT have waited that long. My old bolts were zinc coated steel and after I removed them discovered they had disolved to less than 1/2 their original diameter, both breaking during removal. There's a lesson there. I am going to buy another set and inspect for the proper replacement time.Be safe! Inspect your board's bolts! Don't wait like I did. Lucky nothing happened......

WE haven't been able to use our diving board the last 5 years, since the bolt snapped in two from my brother using it one summer. The house is 30 years old so we assume the diving board is as well. Took us a while to find the correct part as we were clueless. Anyway this seems to be the part and it fit right. Hubby replaced all the old bolts and those snapped as well during removal.MY kids are thrilled that can actually jump off the diving board and it has seen tons of use this summer.

I ordered a diving board anchoring set of bolts. Item came sooner than expected and was exactly as described. Worked like a charm and we’re jumping in the pool.

I refinished my S.R. Smith diving board and I bought this set to extend the life of the hardware and to replace the broken / faded bolt caps. Perfect fit and the board looks brand new. I would have given 5 stars, but took one off because the set is pricey for a couple of bolts, nuts and washers.

Perfect OEM replacement for the bolts on my board. The original carbon steel bolts were about completely rusted through, and the stainless bolts are a real improvement in product. Only proviso: it should come with a small tube of anti-seize compound (which the instructions direct you to use since the bolts are stainless steel and the nuts are bronze). It's not something that most folks have sitting around. I installed the bolts without it, which is fine but means that if there is a need to remove the board, the nuts will likely be sacrificed.

The flat washers that were supplied were to big .I had to replace with smaller ones.They would not fit in the board mold.

Very expensive for 2 stainless steel 1/2 x 3 1/2 carriage bolts and some washers but delivery was prompt and the board went back on its base easily.

Worked great

Exactly what i needed but i reduced the 5 star rating to 4 because the cost is excessive for this.