Tactical 11mm Dovetail to Picatinny Rail Adaptor Mini Snap-in Conversion Mount

The quality is not the highest, no surprise given the low price, but these work well enough and the concept is brilliant. They are spring loaded to spread them but they hang up on the threads of the bolts that are inside the springs. They fit as a bushing between the larger scope ring and the smaller rail. It makes sense to bed these where they touch the rings using epoxy or something similar. They do not work as well with removable (they type that has a manual lever instead of a bolt) scope mounts such as Warn rings because you really want to tighten the rings, more than one would with removable rings to get the play out of the system.

Great product With fast delivery

LIVIQILY could resolve 90% of the negative posts by providing a diagram of how this device functions on the product page. And then provide a very simple instruction sheet with the product. Quarter pager max.I like many, expected the adapter was fastened to the 11mm rail on the weapon and then standard rings installed on the adapter.Instead, the adapter does not mount to the rail at all on its own. It must have the standard rings pressure for it to fasten onto the rail. **Wonder how many people stripped the tiny spring tensioning screw heads trying to get them to stay on the rail???????Another expectation that falls flat on it's face is that you are going to receive a set. People buy rings in sets, you don't buy one ring, you buy a set rings. And so that is the expectation for a ring adapter for a set of rings. And that pretty good deal most expected for a pair, just went, um.The design, once you understand it makes sense. Just don't see it holding up to too much recoil over time, with only the pressure from the rings fastening them to the rail. Think of it as the 1 inch ring sleeve some ring manufactures send out with their lower end 30mm rings. In a pinch, yeah. Long term, not.Also round receivers like my Air Arms TX200 which I bought this non set for, won't accept them. So stop trying, you are just going to scratch the bluing.My mist-guided expectations were so confident, I ordered 3 sets. I mean 3. Cheers

Very easy to install, and is a value for the money..Simply drops into your scope mount to reduce it to the proper size. Fits tight and secure no problems.. I will buy more as needed

Bought this as an adapter to fit my Rossi .22 Rimfire Rifle rails. Bought a CVLife 2.5-10 X 40e Red and Green scope. The mount was too big for my Rossi. You WILL need two of these adapters to fit the CVLife scope...one for the front and back. Nice fit into the scope.. exactly what I needed.

Looked all over for a dovetail piece for this Crossman 1377. Upgrade to the bolt of course. I had to find something short and low profile this worked out great. Confirmed success.

It does work but as good as I need !After mounting a new sight to the rear of my Bone Collector Rifle, I took approximately 20 shots and the Sights and Adapter fell off.I thought is might be my installing method but the same thing happened after the second install.This is a great idea but it needs work, especially when the Air Chamber Receiver is rounded, and that is another story.I returned this one.Added: 08/26/2020 - It appear that this product is not made for a rounded receiver section. The item can not sit low enough to allow proper gripping of the dovetail.

You have to open up the 1'' ring and place the adapter inside the slot then tighten to the dovetail mount.After i figured that out it works great,