airgoo Addressable RGB PC LED Strip, 13.78 x 0.39 x 0.12 inches Clear Silicone Covering, for 5V 3-pin argb Header, Built-in Eight Strong Magnets, Easy to Install

This is a good discrete kit for adding addressable LEDs. The magnets make it easy to mock up and ultimately install the strips using the self adhesive.Be aware, for a Cooler Master RGB/Fan Hub the connector on the provided aRGB interface cable was a little too wide to fit into the hole in the Hub case. This would probably not have been a problem for my motherboard directly and it was easily remedied by trimming away some of the rubber on both sides of the cable's connector using a hobby knife. For those not wanting to modify the provided cable you may want to consider using a stock Cooler Master cable and moving pins between or splicing into the "three" pin locking connector used on the strips. It looks to be of the standard RGB LED, again "three" pin. I docked one star in my review on easy of install due to this, but otherwise I am very happy with the provided parts.They are bright enough for projected light to be seen behind a smoked acrylic cover of a Cooler Master case. I have them tucked under the upper and lower lip of the case. So far the are still in place and the adhesive appeared to grab well during install.For install and size comparison, in a CM TUF Q300L the LEDs reach the entire length of the upper and lower lengths of the case. The provided interface cable and extension worked to get the strips installed and wires routed out of sight. They are working with ASUS Aura on a CM RGB/FAN Hub perfectly.

The media could not be loaded. This led ARGB are really nice, they gave a better look and are easy to install

All LEDs working. Magnetic strip holding in place.Installed in Lian-Li 216 with lighting effects driven by MSI Mystic Light (B550 Tomahawk).Have the 2 strips daisy chained.Using the 5v 3 pin plug along with the extension to reach where I needed.Will update if the strips end up failing.

easy installation with good color accuracy and adhesive magnet quality. looks nice and isn't too sharp on the eyes. Length for me was perfect for installing on the top and sides of my pc but it has one caveat in the length department. For whatever reason, the motherboard 3 pin cable was installed onto the extension cable meaning if you use something like a fan hub that sits in the back panel / bottom of your pc area you will have to plan accordingly, if you plug it into your motherboard only though, you'll be just fine. solid quality on the magnets and lights no complaints but the end that isn't plugged into an extension does stick up so tape it down if you'd like.

The media could not be loaded. Pros, Everything. Addressable in ASUS Aura. Software more complicated than installing the LED's. Just plug, stick to frame, and go. Easy Peesey! With Aura Creator you can build almost any lighting combination. Aura Creator only works with ASUS Armory Crate software built into high end ASUS MOBO's that support Aura. The strips could be a little longer, 13" from first to last LED, but for most it will do for the price. They work, no issues, no complaints. I have the AirGoo RGB LED's also in this system, had them for a year now with no issues. AirGoo makes a great product so far to my knowledge, I will by from this manufacturer again.

There are a lot of LED strips for sale in a range of options at a variety of price points. This one fit my needs and was a reasonable price. I am really impressed with it thus far. The final test will be how long it lasts, but my initial impression is very favorable.I have the strips on the left and right sides of the case. They were easy to install, and the magnets hold the strips in place really well. I love that I don't have to use adhesive and attach them permanently. The cables that come with the kit are more than long enough to get the strips where I want them, and this is a full size case that will accommodate an eATX board. I feel the brightness level is perfect. Not too dim, but not so bright that they light up the room or anything.At this point, I have no complaints about this kit. If I have issues with it later, I will reach out to the manufacturer, and then update this review.

While I wish these came with two of the MSI Mystic Light adapter cables/extensions, so I could connect one strip to each of my motherboard's ARGB headers to create different effects, for the price, I don't reckon I can really complain. They work very well, and they're easy to install. I especially like that they're magnetic, so I can move them around inside my case without fuss. I decided to put one of them in the top of my case and put the other one in a drawer to keep as a backup should I ever need it. It added just the right amount of subtle RGB lighting to my (mostly) blackout build.I definitely recommend them.