Gobrico10 Pairs 20-Inch Rear/Side Mount Soft Close Drawer Slides with Brackets, Full Extension 3-Fold Drawer Glides, Ball Bearing Heavy Duty Cabinet Dresser Slides and Glides

I like these drawer slides a lot and they work well in the first week I've been using them. The problem I have is that I needed 24 slides total so I ordered two box of 10 and two boxes of two. For some reason the boxes of two are an entirely different style and mechanism from the boxes of 10. The ones that come in boxes of two are significantly rougher and get stuck on opening and closing frequently. I'm not sure why this is but I definitely recommend not ordering the two packs.EDIT: I also tried buying the 6 pack, this also has the different and worse mechanism. I would only recommend getting the 10 pack as this appears to be a better mechanism

First and foremost, here is what you need to understand before ordering. If you have face frame cabinets that have a gap along the sides that prevent you from mounting the glides to the side of the cabinet and you will be mounting the glide to the back of the cabinet, buy the length for the cabinet depth, NOT for the drawer depth. Most of my cabinets measure 23" deep from the front edge of the face frame to the back of the cabinet and my drawer boxes are all 20" deep. Based on the response I got from the seller/manufacturer, I ordered 20" glides based on the drawer measurement. As a result, the glides are too short to mount to the back of the cabinet by a couple of inches. My options were to either add blocking to the back of the cabinets or to buy longer glides. This will result in an over extension if I pull the drawer all the way open, but doesn't affect the stability or normal function of the drawers. There is another option if your cabinet design has solid sides with a gap on both sides of the drawers. You can add blocking to fill the gap, allowing for side mounted glides of the drawer depth. Unfortunately, most double door cabinets are open in the center and don't have anything to attach the filler pieces to. I ended up returning the 20" and ordered 22" (the available size that is closest to the cabinet depth without be larger than that depth). The rear brackets will allow you about 1-1/4" of adjustability, so the 1" difference is easily accommodated by the bracket.

Yes I like them. And would buy them again.Problem and solutionOk, to be honest I installed one drawer slide and it would not slide good. I thought it was to tight. Hard to pull open and did not feel good at all. I slept on it and read more reviews. Because I am lazy I did not want to pull the drawer apart to send back. Some reviews explained that once oiled they worked. So I sprayed silicone spray on all three parts of the track and BAM it worked great. Go figure so I decided to do the rest of my drawers. It is still hard to pull open because you are setting the spring to soft close the drawer. Hoping this gets easier as we break them in, but I just told my wife it is childproof 😂.Two of the drawers even oiled would not work and I thought they were defective, turns out I did not have the back bracket squared up good. Since they were not square they did not close good. If this happens to you try this. Loosen 1 bracket/slider at the back (see photo). Then push the drawer in half way. If you can reach under and tighten like this do it. If you can’t reach then look and see how much your bracket moved (mark with pencil) pull the drawer out again and use your pencil mark as guide to tighten bracket and bam it worked great.Kreg JigWorked great for me, I could not have done it without the Kreg Jig. I am not carpenter or handy. Watched you tube video, through directions away and did it. Very simple. Even if you make your own you will need some sort of jig. Because I used these on old cabinets some of my drawers were a little wonky. The jig allowed me to see and adjust as I installed.These will allow you to pull your drawer all the way open. Love that feature.

I purchased the 10 pack/sets of Gobrico 22 Inch Rear/Side Mount Soft Close Ball Bearing/Full Extension Drawer Slides Glides WITH brackets. I replaced all the drawer slides in my RV kitchen and they are working splendidly! We no longer need the latches on the drawers to hold them shut while driving down the road. The soft close feature keeps them shut! The full extension feature helps us utilize all the space in the drawers without having to cram our hands to the back to find stuff (that we never used because we couldn't see it!!). I love that these slides came with the rear metal brackets as there was no guess work on what brackets to purchase. The metal will also hold up a lot longer than the plastic ones. I actually like these slides better than the Liberty slides, which we used in our RV bathroom. I think the glide is much smoother on these and you don't need to push them as hard to get the soft close feature to work. I would definitely purchase these glides again, especially if they continue to offer them at a discount when you purchase a bundle of them. I would recommend them to a friend.

These seem to be very high quality. The bearings were tight and well lubricated. A little harder to open than expected but not difficult or an issue. The close is very soft and automatic and me drawers now feels like a high-end drawer. As with these slides, you must measure correctly and ensure they are parallel or they will not slide correctly and it’s not the slides fault…

wasted my time and money . I paid some handyman for installation. I see rear brackets are missing and work stopped in middle.

Okay value, but they do not slide open and closed easily like normal ball bearing drawer guides should. They are easy to install, but not as high of quality as discribed.

it took me a couple hours to figure out how these should be installed - but once we did they are amazing! we bought base cabinets from lowes and they did not come with the slow close. I think they are essential to a home so I bought these to replace the existing. They work and are WAY cheaper than getting them at a department store.