LILYS PET 8 PCS Water Cooling PETG Hard Tube Bending Kit,Tubing Cut and Bending Tool kit OD 14MM ID 10MM

You NEED this if you want to bend PETG.I'm a perfectionist and my encounter with PETG tubing had me calling for enforcements. ( Thanks DAD :) )The profiles make it possible to get really nice looking bends, but there's stuff you need to know.The inserts are a MUST. Use slightly soapy water and have a basin full of water at your work bench.The cutter is great and gives smart cuts.The best advice I can give is,1 - don't do it2 - order double (or more) the tubing you think you need3 - waste a couple of bits and practice bending it.You ONLY get 1 chance with this stuff, once it's bent, it's staying that way. (or it looks like crxp)Keep the tubing at least 3" from the heat gun. Rotate and go left - right for 2 minutes. You'll feel it soften under it's own weight.DON'T hold the tubing near the area you want to bend or have just heated as you'll leave your finger-prints on the flat bit you just made with your finger.Have someone else eye-ball your angles and dip the tube in the basin to set the bend.Don't use the dumb red pipe thingy. Use the file and take off the hard outer edge and inner.You can reform bends, but watch the heat.Good luck and DO IT :)

Done the job but not 5* due to the angled tools not giving a clean finish as others on the market but the rest of the bag done the job oerfectly

Did the job perfect.