Hager Ashley/ Klik Ashley J501 16A Downlighter Junction Box Terminal Connector

Sturdy, well made junction box that I used when fitting a new LED lamp in my hallway, the lamp needed to fit flush to the ceiling so it wouldn't fit the existing pendant ceiling rose. Easy to fit, I would use this again.

A little large to get through a neat hole in the ceiling, but sturdy, easy to wire and good clamps. Beats using chocblock connectors if you’ve got the space.

This little setup has saved me so much hassle. I was installing a modern pendant into an old school fitting and this gave me the assurance that everything was where it needed to be, nice and safe. Install was easy and with a bit of patience, all my existing wires fit into the unit. Saved me having to buy all the bits for a custom junction box. Great! Would recommend

I wanted to run a lighting spur from an existing down light circuit but found it difficult to find a j-box that would fit through the cavity for the existing down light. But I was delighted when I came across this box which is the perfect size for the job - and delivered next day 👍🏻

I think it depends on where you install this but the top flaps around far to much if you're installing this in the ceiling or under cabinets etc. . It does the job for a lighting loop in system but old school round ceiling roses are a better option for me.

I used one of these to replace a ceiling rose when changing to a flush mounted light in the bathroom.So easy with this box to quickly get a neat, well-ordered, secure result compared to the frustration of wiring up one of the old round juntion boxes with several wires per terminal, no space and no cable clamping.This is a well-designed, easy to use product that actually made the job a pleasure!

The cable clamps are very good and the knock-outs for the cables are easy to remove and leave a clean break.The one thing I had trouble with was viewing the terminal holes as they are below line-of-sight. It would have been better if the terminal groups could slot in and out making it easier to see the holes but that is just my opinion.From an aesthetics point of view a rectangular box might look better.All in all, makes for a meat wiring job.

Great junction box, specially, be using for lights