Speaker Stand Pair for Samsung Speaker Stands and Wall Mount - 33" to 42" Height Adjust Floor Speaker Stand for Samsung Surround Sound Rear Speakers Stand with Keyhole & Thread Hole

When i opened the box, I was impressed with the inclusion of just about any necessary hardware to accommodate many styles of speakers. I am using Samsungs. All hardware si included fort them. The box included a heavy steel plate for the floor, it has a felt-like finish on the bottom to protect the floor, the mounts camd in thre sets of tubes. Three screws fastened the bottom tube to the plate while the second tube was threaded to accept the threads fom the first tube. It was able to be firmly tightened by hand. Finally the 3rd tube was the offset mount for the speaker. It has a threaded plug at the top that accepted a singelsdrew “L” shaped bracket that stood at the top. I was then able to affix the speaker with a single chrome screw that held the speaker securely to the bracket. A convenient cut out was at the bottom and top of the tubing setup to take the power cords for speakers. In the case the connector for my Samsung speakers was to large to fit the cutout, BUT the manufacturer included 4 velcro straps (black to match the tubing finish) to secure the cords to the tubing making them unobtrusive. Once assembled the setup allowed for elevation adjustment by furnished thumbwheel screws with a large knob for easy tightening. This adjustment allowed my to have my speakers at the proper recommended height and direction. ‘I have read other reviews of these stands and it appeared to me that some of the writers were not familiar with setting things up. Remember that there are a lot of different size screws, ALWAYS use your fingers to check that the screws are right for the holes. You will find the correct screws to fit the correct holes. Finger tighten and THEN use the Phillips head screwdriver to do the final tightening. You will not encounter misthreading by being CAREFUL. I love these stands and I am sure I will get many hours of superb enjoyment from them with my surround sound speakers.

Sleek, Stable, unassuming! You tie down the wire with a strap and that's odd, but fine. Does the job and its not bulky.

Let's start with the items that came in the box.I had every screw and part needed. Nothing was damaged and threads on the poles were nice and non cross threaded. They screwed on easily.It was confusing trying to figure out what screw was for what but process of elimination took care of that.The base could be heavier. Although the base is decent sized, the Samsung q990c rear speakers are super heavy and makes the stands almost tipsy. I will most likely add weights to the base to make them more stable.The screw to screw the top bar to maintain height is okay. I had to screw it in all the way just to get it to hold it's height with the weight of the samsung speakers.I am overall satisfied and like the look of these stands. The base easily slides under my couch. Would definitely recommend again.

Thought I was gonna like these by the weight of the box...heavier so fill metal. Once I start putting them together I changed my mind. The directions were next to nothing and there was alot of hardware in the box as it had pieces for haning, for the stands, for different types of speakers etc. No direction as what screws go to what. Figured out the first stand with the correct hardware. Went to put the twist screw in that holds the bar at adjustable heights and it goes in only a couple turns the freezes. Can't back it out or go forward but not in enough to hold the bar. Something isn't right with the threads in the lower piece. No quality so would recommend another style or manufacturer.

Everything was as described and nothing was missing

Todo ok

They work as they should. All metal. Heavy base for stability

The stands themselves are ok for my lightweight speakers. The issue I have is one of the “B” poles has damaged internal threads. I’m hoping that I can get a replacement rather than boxing them up and returning them.