Lutron Claro 2 Gang Decorator Wallplate (48-Pack), CW-2-BL-48, Black

These wall plates completely hide the screws, which gives them a sleek modern look. They work beautifully with all of my Lutron Caseta switches and are very easy to install. The design allows you to access the screws for the actual switch box beneath this face plate while you are installing it, so you can adjust their position to line everything up before you tighten everything down.The only tricky thing about this face plate is that it can be challenging to remove the outer cover without breaking it. You just have to be very careful when doing so, working around the edges so you don't bend it too much.

These wall plates look beautiful against almost any color wall. The screws are hidden, providing a very clean and modern look for your switches. We pair these with the Lutron Cassetta switches which work great.These work by installing a bracket plate first using screws. You then have a separate 2nd cover that snaps into place. Be sure to snap all sections as it can give the appearance of being uneven, especially in the middle, if not all snaps are secured. You may think you're going to break it when removing the snapped piece, but so far we haven't broken any and we've done quite a few in our house.The only downside is that, depending on your switches, you may need to loosen or tighten the plate or the switch to get them perfectly flush. This takes some time, but after over a dozen switches, I've always gotten it to sit flush.

I love these things! It should be noted I have tried Leviton's version as well and they do not offer the quality and look these, the Lutron's do.Yes, you are going to spend much more with these than a traditional .20 cent outlet cover but.... why not? They look so cool and really give a nice finished look to your walls especially on a tiled kitchen back splash. Why not spend the little extra and finish of a tiled back splash or a nicely painted wall.... you spend the money on nice tile or similar and a high quality paint then slap a crappy outlet cover up with stripped screws? To me just doesn't seem right, but thats just my opinion. The high gloss to them make a super slick and easy to clean surface. I'm sold!

Two pieces that make a flush panel. The picture is just the top visual portion, behind it is a piece that you screw onto the switches themselves. With this you attach it to the 2 gang setup, then screw them into place. BUT you need to be sure that you adjust the depth that you screwed them into the wall properly in order to ensure the switches are flush with the top portion that will cover this piece. About a 1/4 inch, give or take, raised from the other surface so when you snap this in place it looks great. If you missed the mark you can CAREFULLY remove hte cover and make the adjustments.

When I purchased this switch plate cover online from Amazon, I didn't realized quite what I was ordering. I assumed I was getting a standard two-outlet cover plate. Once it arrived and I examined it, I found a that I had ordered something just a bit different. This cover does not have any exposed screws. On a normal switch plate cover of this size, you would find four screws. This cover has four screws, but they are covered so that they not visible. This is accomplished by a snap-on outer cover. So the first part of the cover screws down as a normal cover plate would, but then you snap the outer cover on over that. It is a nice idea. The only possible con for this that I see is that the cover is just a bit thicker (or deeper) than a normal cover, as you might expect since it is actually two pieces. For most installations this should not be a problem, but it is something to keep in mind depending on your application.

AWESOME FACE PLATE FOR MY DUAL WEMO INSTALL. This is worth every penny and more they have such a great clean product I am shocked they do not charge more. I would have easily paid 10$ for this. This looks so clean fresh love it and the fact it fits my WeMo application perfectly is a major major plus !!!!!!!

We revamped all the lighting in our home and elected to go with these Lutron switch cover plates. They are attractive, for sure. But they are expensive and fussy. Because we were painting after he electrician did the work I was warned to be very careful when removing the plate as the teeth holding the face to the plate can break off easily. So I was VERY careful when doing so, but could see how one could break the teeth. Unlike plates with visible screws, if you have to make adjustments for level or dept you have to take the face plate off. Without going into more detail, getting the install right for level and depth was more challenging than your typical cover plates. Price? I found the price of these plates to be outrageous and would estimate that it probably costs less than 50¢ to make them and most other cover plates cost no more than $1-$2. But we pay up for vanity, don't we? That's the look my wife wanted, so I just paid up for them.If you don't mind paying up and don't mind fiddling or paying someone else to install them, buy them by all means. They do look good. Would I go that route again? Probably, only because we sank $3000 into the electrical work so we were already deep into the project financially. Would I change to these plates for the sake of a different look alone? No.

I am really impressed with how these switch covers look. I have always used the white metal switch covers in my home because I thought they looked better than those cheap plastic ones. Then I started using the Lutron Caseta smart switches and discovered these covers. I love not being able to see the screws! It gives a much cleaner, more professional look! It would appear that these covers will work with any switch, so I will eventually replace all of my covers.

I absolutely love these. I got a few free with Lutron Caseta smart switches, and they're just so well designed that I ended up replacing most of the wallplates in my house with these. You can adjust the switches through holes behind the cover plate; the mounting screws for the plates are Philips head which makes them easier to install with a power tool; and they are significantly larger than traditional wall plates, so they cover damaged or poorly cut holes much better.If you're looking to buy new wallplates, these are far and away my number 1 recommendation.

Replaced all my wall switches from the original builder's to the glossy white Lutrons. The clean appearance with no screws visible is a huge selling point, and the thickness of the plate makes it feel substantial. The glossy appearance is also attractive.Only minor quibble is that when you remove the faceplate, it can bend a bit and you need to take care that when you reinsert it, the corners don't appear to be bending out from the back plate.

This wallplate looks great. Its made of two pieces. Baseplate screws into the switches like a normal plate does. Top plate snaps tightly to baseplate so that no screws are showing. Super clean look. Note that if you need to remove the Top plate, you have to really pry it hard to the point you think its going to break in order to remove it.

Plastic is a bit rough on these orders from time to time and it’s a pain to disconnect the cover panel once secured to the wall, and the cover is prone to bending. With that said, these are great looking items, and much better in terms of decorative fit in my condo. Wish these weren’t so expensive, however! They’re slightly smaller than the traditional white plastic covers, however I am unsure if this has to do more with the brand.

Great when mounting a Lutron Caseta switch and a wireless dimmer side by side using the wall mounting bracket for the dimmer. Just snap the plastic back off the dimmer mounting holder, and you can flush mount the remote right next to the inset switch. Its deeper than a regular plate so the difference in the depth of switch and depth of the remote is not so noticeable.

I love these! I just switched out all my old light switch covers in my apartment for these. They were extremely easy to install (and I have almost no handy skills). They look clean because the screws don't show. They were a small change in my apartment but made a huge difference!

Leurs produits sont en général très bien et faciles à installer avec un peu de débrouillardise.

C'est parfait, ça améliore l'esthétisme des interrupteurs

As described. Looks good. Very pleased with the quality

We like the simplicity and finish of these plates...no visible screw heads. Prices are significantly lower on this Amazon site and way better than what you would pay in stores.

This wallplate is modern, slim and elegant. I like the fact it doesn't show any screw

Installed easy and looks great in my condo

Lutron is a well known brand for years. I have a few wall plates at my condo and always satisfied with the finish and quality.

Looks great

This is 2 plates. One is the normal plate where you screw it in and one snaps over the first plate to cover the plate with the screw holes. Very nice.