Metra 95-5812 Double DIN Installation Kit Fits SELECT 2004-2019 Ford Vehicles -Black.

worked fine on my 2009 f550

Excelente 👌🏻

The item matches the description perfectly. It is built to be heavy-duty, ensuring durability and strength, making it ideal for demanding tasks. Additionally, the price is quite reasonable considering the quality and performance it offers. I wholeheartedly recommend this product to anyone in search of a reliable and sturdy option.

Upon assembly of the bracket and attachment to radio, I was not sure that this would fit my 2006 F350 SD. I ended up having to do a little trimming to fit buttons and knobs on my chosen radio. I also had to remove the bottom mounting tabs on the frame, flush with the vertical sides of the frame, as they interfered with HVAC and powerpoint mounting bosses on the truck trim panel. After this, all fit well!

This for my 2018 Ford E-450 RV dash perfectly. The tabs on the back have to be cut off for this fit but this is in the instructions. The slide in frame that comes with the stereo you are installing does not get used with this. You will screw the metra sides to the stereo and that provides the proper support.

This review is strictly for a 2008 Ford Explorer, the product may be perfectly suitable for other vehicles.I've used Metra dash kits for many years now, and have always been pleased with their quality and finish. In this case, I am very disappointed. This kit is for both single and double DIN installations. I am installing a double DIN enonon G2104 head unit. It is clear they tried to make this one product work for a wide array of vehicles. As such there are modifications which are required to make this kit work with your specific vehicle. I'll try to describe each issue.1. The dash kit when properly assembled just doesn't fit properly into the dash opening. There are gaps between my dash trim, and this install kit's face plate. There is absolutely no way to correct or fix this.2. The kit requires you to cut tabs off of the kit for the explorer installation. You'll need to not only cut off the tabs, but sand down the bracket where the cut was made.3. For the explorer install spacers are included and required. The spacers are problematic. They should snap in place, but they are too loose, and tend to fall out as you are attempting to secure the kit to the dash.4. The face plate requires you to recess your radio into the dash. The kit's face place sits on top of your head units face plate, and pushes your head unit backward into the dash recessing it. Now this doesn't sound bad until you see it installed, it looks like a hack rather than a clean installation. If you have a deep head unit, you may even have issues getting it to fit in.5. Because the face plate covers over the head units face plate, units with controls near the edge will be blocked by this kit's face plate. On my unit, the USB port, SD card slot, infrared window, and a few other items we inaccessible with this kit. Also if you have knobs, the kit may not fit at all. The knobs on my unit are close to the edge, and since the kit needs to cover a bit of the units face plate, the knobs wouldn't even fit through the opening in the kit. If you have a motorized front face, there is no way this kit will work. Rather than covering the head unit's front face, they should have made the kit to allow the head unit's bezel to pop through the kits face plate.6. Be wary of using the included screws, they are very long, and may interfere with the functioning of your head unit. You would be better off getting shorter screws.Overall I am seriously disappointed with this kit and would not recommend it for a 4th gen explorer installation.

The instructions are extremely vague and you need to have a bit of common sense and some wit to you to figure out how to install this and have it become usable. It is a "one size fits most" type of product so you should be aware of this. I had to cut some of it to make it fit in my Ford Econoline dash. I also needed to round out a hole to fit a screw on the side of the unit. The instructions tell you to install the unit and then wire it, just don't. Common sense will tell you to wire it and then install it. Little things like that will make you scratch your head and wonder who wrote this and how am I suppose to do that? but other than that. It does the job intended and it works just fine.

This is required to install a new double DIN radio/AV center in a Ford E450 Super Duty Class C Motorhome. It is a perfect fit.