REDTRON Led Strip Connectors Kit, 10mm RGB Led Light Connector Includes 10x L Shape Connectors,2M LED Strip Light Extension Cable,4X Strip to Strip Jumpers,5X 4 Pin Male Connectors

Good to join TP-Link light strip. I had a problem getting the connects to join properly. the four connects have to be strong. i put a small bit of cardboard across the 4 metal tips and snapped the connector. test fully before putting into place. if you can use all the light spectrum of colours its working. Should be very pretty bright if working fully. Looks great now and excellent for food prep. pictures of lights not connected right and fully in place 100% bright.

good that you get 2 although the connection seems a bit insecure so i needed to put some tape around the joint to ensure it didn't come apart as I was concealing the cable behind panelling.

Works as advertised. Delivery was prompt, next day. Lights are perfect and fits purpose. Very pleased with purchase. Have actually bought over 200 meters and still buying more. Need then for use in Nigeria.

Kit is ideal for fitting leds on top of kitchen cupboards as has angle connectors and for joining led strips together, much needed bit of kit for fitting leds.

Easy to install and operate. Colour dissipation very good. Have had them in place for a few years but they have now failed - not sure why.

Yes great

I purchased these connectors for the strip lights I had purchased as I needed to turn a few corners. The theory of turning 90 degrees and just snapping a connector closed is pretty simple, however, getting a positive connection with this set is so difficult. Every time I created a new connection I would check my progress by switching the strip on but would have to fiddle with and move the connector and just by shifting it with my fingers the lights would come on but then go off when I let go of the connector. Then sometimes only 1 colour would work on one of the runs and this required taking apart and re connecting again. I did find packing the back before the strip lights before it entered the connector created an increase in success. For the last turn I had to make I decided to use the wire connector and this worked 1st time. Once my tv was back on the wall with the lights installed I connected them up despite having already checked them when the tv was down on the floor doing the installing. for some reason connector 2 had developed a fault, manipulating it with my finger and thumb seemed to cure the problem but as soon as I let go it would go off again. Off the wall came the tv and the plastic right angled connector was removed and I replaced it with the wire connector which worked first time. Back on the wall went the tv and everything connected up. This job took 3 hours, far longer than it should have as the connectors are absolutely not fit for purpose. I considered the problem and decided to install these same lights behind a bookcase I have. I ordered the connectors I have pasted here as a link and they worked first time with every connection and the same job was done on the bookcase in just an hour.cornerhttps://www.amazon.co.uk/gp/product/B09BDWKQS4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1I have ordered many many things over the years from Amazon but never left a product review but felt anyone reading this deserves to be warned what to expect

I like how long it is but be careful the pins are sensitive but the cable is sturdy so be careful. The package included: 4 male pins and x2 2m of cable extensions for LED controller and LED light. Good product I recommend buying it.