VOUNOT® Loading Ramps, Heavy Duty Foldable Galvanized Metal Ramps Non-Slip with Hook Safety Straps for Van, Lawnmower, ATV, Quad Motorcycle, 400 kg Max Loading

Pleased with these ramps which I got after returning the shorter, non-foldable, version (which proved too short, see my review of that). Assembled and used for the first time today, so time will tell on durability. Some points to note:1. Assembly a bit fiddly, the instruction manual is basic, illustrations hard to read without a magnifying glass. That said the information is there, recommend a careful read and use of safety gloves and clothing when assembling and using, as there are very sharp areas that can cause injury. Quality seems OK on initial inspection, all machined holes lined up exactly. Supplied hardware was correct (presumed stainless), nuts were of 13mm locknut hex type, bolt heads slightly larger and marked '48'.2. Make sure the indented hinge joint on one half lines up with the two studs on the other half, otherwise the angle between the two halves will be too great. When correctly seated the two halves are only 10-15 degrees 'off straight line' THIS SOULD BE CLEARLY STATED IN THE DESCRIPTION).3. Handled a Viking lawn mower like a breeze. I also tried walking up and down each ramp separately and they felt stable at my weight (about 70kg).

Unfortunately I had to return the first set sent. Possibly the parcel had already been opened and returned because fixing screws were missing, one carry handle was unattached and one ramp was bent at the end. The replacement set were fine.I did a fair bit of homework to try and make sure I wasn't going to be disappointed with strength and quality as my ride-on mower plus rider comes to over 300kg, and reading reviews on other ramps had me a little concerned. Now that the ramps have been assembled and used a few times I am impressed with them for strength and surface grip. My previous ramps were difficult to grip on when the mower tyres were covered in wet grass. The only thing I hadn't expected was that, when unfolded, the ramps don't quite open out into a straight flat line, which means the initial gradient when loading is steeper than my previous set. So far that hasn't too much of an issue.

Excellent quality, very pleased.

Fast delivery , good quality , easy assembly , ideal for purpose

Ramps are good and adequate.Carry handles not very good. Split after 2 weeks use. Tried to contact the manufacturer and there agent in the UK. No contact made.Amazon and I negotiated a mutual credit.Stil, nothing from manufacturer

Several of the reviews mention adding spacers or thick washers into the "hinge" bolt, there's absolutely no need, simply don't completely tighten the "hinge" bolt nuts up and then the mechanism works fine. Those hinge bolts are not taking any weight once the ramps are unfolded and in use, the thick metal "teeth" do that, those bolts are just there to keep the two parts together and to aid with folding / unfolding. They have nylon lock nuts so they won't come undone, just do them both up so that about 4mm of the bolt protudes through the nut and the folding action is just slightly stiff but not floppy. You then have enough flexibiity in the folding action for the "fingers" to overcome any slight protusions in the sides of the ramps and they lock together absolutely perfectly. Just make sure the "fingers" properly engage with the studs, the ramps do not go completely flat, there's maybe 5 degrees out when they're correctly engaged.

Would be perfect if just a bit wider. To put a mobility scooter in a shed. It does work though.

Good Quality for the price