SnozzlePro Universal Hair Dryer Attachment Nozzle Adapter for Xtava Black Orchid Diffuser, Curly Hair Dryer Diffuser, Concentrator Nozzle Replacement, Fits Most Nozzle Diameters from 1.5” to 2.25”

The photo makes it seems as if the openings on each end are equal size, but one is slightly smaller than the other.The measurements are given for accuracy and to save you aggravation and waste, so be sure to use them and measure your devices before ordering. I ordered it at the same time as my diffuser...I bought this because I wanted to use the black orchid diffuser with my ancient Conair Ion Shine 1875, and I was worried it wouldn't fit. Turns out the opening to my dryer is so large the black orchid diffuser fits INTO the hair dryer opening -- all I have to do is press very firmly and it fits into place without popping out. I will use the snozzlepro for other dryer attachments now...I thought about returning the snozzlepro, but then thought I should try popping it onto the end of my Revlon One Step, which I occasionally try to use on the cool setting. If you have a Revlon One Step, you know there are at least four major problems with it. One of them is that some of your hair gets caught in the rim underneath the upper cap/handhold as you turn it, and you either rip the hairs out of your head without realizing, or you have to stop and try to pry the hairs out. I thought the wide end of the snozzlepro might stretch to fit over that rim, to protect my hair from getting caught in it. (Turns out it's a little too small for that and keeps popping off, but the snozzlepro manufacturer was very sweet and tried to help me make it work, even though it is not intended for that purpose.) [In case you're curious about the other problems with the Revlon One Step -- the heat is too high, the bristles grab your hair to the point of causing breakage, and the sound is so loud you should use earplugs. I'm going to stop using it.]

This wonderful product allowed me to continue using my favorite T3 Featherweight blowdryer with my new Xtava Black Orchid diffuser!! I didn't have to buy a new blowdryer! I will admit that I measured the wrong thing when I ordered the SnozzlePro adapter (I measured the base of the concentrator nozzle that came with the blowdryer and not the actual blowdryer nozzle - oops!) My blowdryer is actually a little wider than the measurements given for the SnozzlePro. It was so close, I was determined to make it work! I was able to do it with a little manipulation and a slender tool to give just a little extra stretch to get the SnozzlePro over the end of the blowdryer nozzle (used a tool WITHOUT any sharp edges or points, nothing that could damage the SnozzlePro or the blowdryer). **I did this at my own risk - knowing that I could possibly damage the SnozzlePro or my blowdryer!!** Very gently, I was able to get the SnozzlePro onto my blowdryer. I made sure it was evenly attached all the way around before adding the Xtava Black Orchid diffuser. I attached the diffuser to the SnozzlePro AFTER I put the SnozzlePro on the blowdryer - the opposite of what the instructions advise you to do. (also note that before attaching the SnozzlePro to the blowdryer, I put the diffuser on the SnozzlePro a couple of times to make sure it fit properly and that I would be able to attach it without needing to use the other end of the adapter to make sure it was secure). After getting everything in place, I'm happy to say that it's very secure and there's nothing that is loose or has any wiggle room whatsoever!! I'm never removing it!! It's there until the dryer kicks the bucket or something breaks! It's working beautifully! It holds very tightly and securely, it hasn't slipped or moved at all since I attached everything!! You can see in the pics how tightly it's holding. I love drying my hair with this diffuser! My hair looks amazing and dries faster than when I used to use a round brush! No more work drying with a round brush! Just using this diffuser and moving it to different sections of my hair, it's easier than ever to dry my hair! Thank you for making this product that allows us to use this wonderful diffuser on other brands of blowdryers! I will be recommending it to everyone who has curly hair!Update - the adapter and diffuser has come off a couple of times and it takes a little bit of work to get it back on because my blow dryer is a tiny bit bigger than the measurements but I can get it back on. I think it came off because I accidentally held it by the adapter or grabbed it by the diffuser. Definitely only hold it by the barrel of the blow dryer (like in my 3rd pic) or the handle for the blow dryer!

I have the Shark Flexstyle and Black Orchid Diffuser. The Snozzle is fairly easy to get on with a little finagling - it's a tight fit, but not impossibly so. However, the neck of the Black Orchid isn't long enough to hold it securely, so it slips off sometimes during use, especially if you're pressing it gently against your head or holding it upside down. Since the neck is so short, it also has to come down farther than I'd like on the Shark and covers the hinge that allows it to rotate.It holds up well on the medium heat setting. I don't use the hottest setting, but feel like it would be fine with that as well.Overall I'm happy with it, and it works well enough to be able to use them together as long as you're gentle. It's annoying at times, but I'd rather deal with it than use the diffuser that came with the Shark.

I bought the black lotus diffuser thinking it would fit my dryer. It did not. So I bought this since it mentions the black lotus diffuser. Fits nicely on my dryer, but keeps slipping off the diffuser like others are saying. Frustrating and disappointing. I'll have to get with my son and see if he can design me something to keep it in place with his 3d printer. Over all if it actually kept in place it would be great, but right now it's a pain.