HAMRVL Led Aluminum Channel Corner Kit for Led Strip Lights L Shape 45x45 90 Degree Connectors Suit for V Shape Kitchen Cabinets LED Aluminum System 16x16mm with Screw Angle Turning Solution

These LED aluminum channel corner connectors worked exactly as expected with no issues. The final result looks clean and professional, making them a great choice for seamless installations.

Worked perfect. Made well. Inserted easy. good price

The media could not be loaded. When installing v-channel angled downward from ceilings with existing ceiling crown molding that doesn’t match up with the pre-drilled holes in the channel corner l-shape 45x45 90 degree connectors. I suggest that you first use double backed foam tape to hold the corner Pieces in place. Then drill a small hole from the inside of corner piece where it will go through the existing wood trim and use a small screw to securely affix the corner piece. See attached photos. This makes the installation of the v-channel , the LED light string and plastic fogged cover easier and more secure .Where I fed the power cables through one corner piece I drilled a hole large enough to feed Two strings of lights down to keep the install cleaner without any Uncovered hot spots.

These corner pieces really finished the look and helped keep the transitions in the corners clean looking. Also because it creates a little of a soft curve, it doesn't require you to bend or crease the led light strip. I found this tip on anther product review and I'm going to share it because it made installing the led light so easily. Before you install these, take a razor blade and make a slice in the little section between the front where it connects to the top. These are heavy duty plastic so it won't affect the structure of them nor will you see it. Then when you are ready to install your led light strip, with some finger strength, you can pry it open and then feed the strip down through the slit. This prevents you from having to feed the whole led light strip through each corner piece potentially damaging the leds as you do it. We just finished installing the track and led lights yesterday and this tip was a life saver!

Good

I purchased this product along with the corresponding diffusing channels for my Philips Hue light strips, but unfortunately, they were not large enough for my needs. I had read a review claiming they would fit Philips Hue strips, and the generated answer also suggested compatibility, but that was not the case. The corners were too tight for my light strip, making it impossible to get it through, and broke my light strip.If you have a smaller, thinner, and more flexible light strip, you might be able to use these corner pieces. However, if your light strip is closer to the maximum size, I recommend looking for alternatives. Additionally, these only work on the outer corner, so if you need both corner angles, there are other options available that come with more pieces and angles at a better price.I don’t think the pieces will break, but since I never mounted them, I can't comment on their long-term quality or durability. If you do use these, keep in mind that the light strip will be covered and not visible through the corner pieces.

I used these to mount some aluminum LED channels; once these were in place, they were secure enough to hold the entire assembly together!Used this for some workbench lighting with:These LEDs: B0B9G5DZW8This Power Supply: B095VWHPCCThese Channels / Light Diffusers: B01NBC0NI9These Corner connectors (all that is holding the above in place): B08HRJ7WSFThese all work really well together and provide exceptionally bright, even light over my workbench area.

My only complaint is that the material is pretty thick. This causes a substantial gap between the track and the wall.