CREWORKS30x38cm 5-in-1 Heat Press Machine Professional Swing Away Heat Press for T Shirt Cup Hat Mask Cap Plate Mouse Pad Tote Bag Pillow Case Coaster Ceramic Tile for Home Charity or Business

Good quality and a good product

value for money, bit tricky to work out the settings but works well.

Does the job, but it’s not perfect. Changing the dye is a headache, and the build quality of the monitor isn’t great—you have to be very careful while handling it. It doesn’t support A3 size, and you need to figure out the best temperature settings yourself.That said, for the price and what it offers, it’s fine overall, but don’t expect it to be hassle-free.

I have been using my press for around 2 months now and it's going very well. Easy to set up, heat seems to be even throughout. Slates etc turning out beautifully. There's no need to break the bank with an expensive press especially if you're new to sublimating.No issues at all!

Coasters seem to work well but anything with fabric and sublimation ink smudges no matter what I try. It moves forward whilst it's clamping down and makes a smudge.

I’ve used this press with both sublimation on cups and t-shirts, heat transfer inkjet paper and heat press vinyl. The machine worked well on all of them. Unfortunately it came with no instruction manual, so I had to watch videos and read blogs to learn how to use the thing. This came with its own set of problems, so much conflicting information. You’ll learn which works best for the materials your working with by trial and error, sometimes increasing or decreasing the heat by a couple of degrees or the time by a couple of seconds. You’ll also need a larger Allen key, than the one provided, for assembling the mug press.

I have only pressed about 150 times so far but so far so good. I seem to get even heat distribution across the plate and upon checking with a laser thermometer this is the case. Easy and simple to use with consistent results.

This is, in all fairness, a piece of junk and will cause you more headache than satisfaction.It came in a really poor state, the controller had its housing detached and the back had vaseline on it, the power cable came with some discolouring spots, the mug press came unglued in most of the surface.The main heat press does what it says on the tin, BUT the mug press is hit and miss...7/10 mugs are usable, with a 30% of the prints being faded toward the ends.The cap press is a piece of...junk...on its own as I was not able to print on any caps so far due to the awkward setup..I did not manage to stretch the fabric enough on the base plate so I only got wrinkled contact...A COMPLETE WASTE OF MONEY.I am waiting for Amazon to tell me if I can return this if I no longer have the box