Venhill VWK003-BK Universal Motorcycle Shop Multi Throttle Cable Kit

I love this kit! Why? Here's the backstory: My kids and I bought a couple go karts on CraigsList with the expectation we were going to fix them up and they could have a little fun in the yard, plus I could teach them the value and skill of working on your own vehicles and being resourceful. We needed cables for the brakes and the throttle and all we could find the local stores are the cheap, solid metal versions for lawnmowers. I searched all over Amazon, only to find an assortment of pre-made emergency brake cables for cars and trucks and everything would need modification to work in our application. I thought I was out of luck until I found this setup as well as the Venhill VWK002-BK Universal Motorcycle Shop Multi Clutch Cable Kit. We bought both and they have been wonderful!If you're buying these, make sure you have the tools to put them together! You will need:1) A soldering iron - the ends are VERY well made and slide right over the end of the cables, but they do need to be soldered on so make sure you have a good hot iron and solder ( The solder I used was the Kester Pocket Pack Solder 60/40 0.031 0.50 oz. Tube and it's worked perfect for me)2) You need a hacksaw - be gentle as you cut through the conduit, you don't want to smash it with side cutters!3) belt sander, grinder or sandpaper - once you cut the conduit, sand the edge so it's smooth and burr free. I have a belt sander and tapered the edges so the ferrules would slide on easy.After that, you're good to go! We made brake cables for 2 karts, both disk brakes and they're holding up well. We also made the throttle cables and for 3 karts and all have smooth action, and appear as though they will give us a good long life!

Needed a LONG throttle cable for my VW Trike build. This kit had everything except solder for ends. If you don't know how, don't worry. There are a lot of you tube videos on it.

After ordering 3 different throttle cables for my mini cart, all being too short or something else wrong, I decided I needed to make my own custom throttle cable. This kit allowed me to do exactly that, and now I have a functioning throttle. I also used liquid rosin flux along with a sottering iron to fix the ends of the cable. I would recommend this kit to any first timers. Watch a few youtube videos on how to make a custom throttle, and you'll see it's not too hard.

This kit makes it so easy to make your own throttle and choke cables. I don't think I will ever buy a "regular" cable again!

This was so easy to install it was exactly what my husband needed in order to do the extension he need it in order to compensate for the ape hangers he put on very good and worth the money

This is a great kit. It is however overpriced bike cable but it's handy to have everything you need in once purchase. Make sure your cable is surgically clean I use brake clean and clean cloth.Make sure you use liquid rosin flux as well. It will help the solder get into and around all the nooks and crannies of your cable and ferrell! Having a solder pot is handy but not nessisary. I do it with a soldering iron that's butane powered. Nice and hot. good luck!

The order was missing all the cable end parts. It is useless in the state received

It was just as it described. It looks as of good quality, but I haven't used it yet, because l am building a trike and am working a little at a time. Plus it was a decent price for what I needed and the only one I could find long enough for what I needed.