FIREGAS Cooker Hood 60cm, Wall/Cabinet Mounted Extractor Hood with 202m³/h, Recirculation & Ducting Modes, 3-Speed Push Button Control, Stainless Steel Extractor Fan

easy to install..( i used it recirculating option ).screwed to rear wall..no problems..if you want to use the 4 keyhole slots in top to secure to underneath of a unit..you got problem.rear ones dont need because its screwed to the wall..but the front two slots are in fact level with the front door of the cupboard.wall unit is 300 m/m deep...front hole slots approx 290 m/m..so you cant use..unless you dont want to open your cupboard ever again.crazy dimensions from manufacturer.i had to drill 2 holes approx 30 m/m back from the ones in unit to secure it to bottom of my overhead cupboard...all ok now..but removing the blue protective plastic before fully installing is easy enough..except for the front line panel with the light in it...the 2 metal faces have plastic in the line..bloody impossible to remove it all..leaves a blue visible line in front of the light...right across the width of the unit ???...careful use of Stanley blade removed most of it...not good.also beware of the edges inside unit sides..like serrated razor blades whilst doing up screws touched a finger alone one edge...get 15m/m slash on end of one finger...bad !!..once all in ..looks fine..everything works perfectly...3rd fan speed a tad noisy but it dont run for long..looks sleek and modern compared with what i had in before ( 30 year old hygena hood )can recommend the unit..just take care fitting it

Good quality for the price, no issues fitting, comes with a 3 pin plug attached that wasn’t needed. Overall good purchase for price

I purchased this extractor to replace an old and worn out unit. Very easy to fit with clear instructions and templates. It works much more effectively with the 3 speed fan but it is quite noisy in comparison to the old unit. The led lights located towards the front are very efficient. Overall a good unit

Great unit

Quality was a poor in my opinion. The reason I returned the extractor was that the charcoal filter hardly contained any filtering material as can be seen in my photos. With the open mesh aluminium screens and the filter it would be unlikely any grease or odours would be filtered. I would not recommend this extractor fan.

Very good

The extractor is stylish and when installed works very well, and is relatively quiet. The quality of the item was lacking and thankfully hidden was the raised screws and small dent on the top of the item. I managed to get a small discount for this.Installation however was a different matter, I had to drill extra holes due to the fact the thing could not hole its own weight and sagged when I used the rear fitting instructions. I had to secure it to the kitchen cupboards through the side of the the item. Once fitted though looks nice and works well. But not worth the money.

Really easy to install - perfect