for iPhone Xs Max Screen Replacement,LCD Display 3D Touch Digitizer Assembly with Screen Protector+Repair Tools Compatible with iPhone Xs Max 6.5 inch (Model A1921, A2101, A2102, A2103, A2104)

Review for XS Max Screen: I really like how it’s touch sensitive. Display color is good. Day 1 so far, pic taken from a 7 plus of the finished product. They give you everything needed for the replacement, screen protector is good as far as it has a black liner to make the screen protector blend in with the black edges of the new screen which I really love, we’ll see regarding the durability of the screen and protector.A warning- REMOVE the SIM card tray, EVEN if it’s empty. If you don’t, the screen will come off with light heat but it’ll split in a way that blends in with the edges of the inside of the phone, and it’ll be a real pain discerning the ear speaker parts. If that happens, DO NOT pull on the ear speaker or any part of it aside from disconnecting the ribbon cable part only from the phone base, after you unplug the ribbon from under the plate, find the edge of old screen and separate that properly, slowly, carefully, and once it’s disconnected from the cable to the actual phone, it’ll just lift off with the left over screen metal/black lip lining the interior phone edges, use new screen as a reference for any old screen parts that may have stuck to the ear speaker- as you do this or it may even slide apart. Again that’s ONLY if you forget to remove the SIM card tray.Make sure to install the interior glue liner BEFORE you connect any cables to the phone base then hold the new screw up enough to not stress the cables but not have the new screen stick to the glue As you screw the little screws back into the plates.Be sure once you remove the digital flex cable to be careful with the glued part if glued in addition to how it ofc is connected by the ribbon. These are super delicate. The screws for the ear speaker will be attached to the new screen, not the phone base.Nothing in this process requires force, if it doesn’t pop off easily, check to make the screws are out and it’s properly disconnected, before you go yanking.Pro tip: get a blank piece of paper with scotch tape, fold the tape in small pieces to be double side or grab double sided tape, stick each piece of tape to the paper and number 1-17, (account for the two plates and the SIM card tray) and take mental note if you are removing what screws top to bottom or left to right, place the tiny screw on each piece of tape as you go and even label the paper if you need to buy screw regions so you’ll remember. Then go backwards the left to right or too to bottom you removed the screws. Really helps if you don’t have a sticky mat and works like a charm. These screw drivers are magnetized decent to gets the screws out and back in well.Best of luck!

Prongs were bent the wrong way. Screen is way thicker and sticks out way farther I can barely get my case on. The screen won’t click in on one side of you try to push on it to hard you get the ink marks or running colors. Picture is clean and crisp but with the space between not being able to click the screen in all around the phone is it’s one side lose stuff will be able to get in and it comes loose. Really disappointed. Now that I’m ready reviews and not just seeing the better ones, sounds like it’s a known issue that the screen is thicker. But I didn’t expect to get a product with the prongs facing the wrong way compared to the original. I returned for replacement but now thinking this was too good to be true and hoping that it will work until the next comes. I will probably completely order a new one and see if I what the replacement looks like so I have a backup in case that one has to be returned too. Easy enough installation. Man I wish I had the same luck that the others who said they had perfect fit and works well. The ink smearing with pressure makes me extremely nervous and the fact that it’s loose and sticks out so far I feel very vulnerable!! Will try once more myself and if the products are still crappy I’ll just have to pay to have it fixed :(

I recently purchased a replacement screen for my iPhone XS Max, and overall, I have mixed feelings about it. Here’s my breakdown:Pros:✔️ Decent Display Quality: The screen offers good brightness and color accuracy, though it’s not quite on par with the original OLED display.✔️ Touch Responsiveness: The touch sensitivity is smooth and responsive, with no noticeable lag or dead spots.✔️ Easy Installation: If you have the right tools and some experience, installation is fairly straightforward. The included instructions (if any) were helpful.

This works great, but be very careful when taking the front camera off the original screen. That holds the iPhone Face ID feature, if you break the flat ribbon that connects it to the phone, you’re not going to have Face ID anymore. Watch a tutorial so you know exactly what to avoid. This was a great fit, easy to install, great value. The screen works, it’s what I’m using right now to leave this review.

Exelene muy bien material me encanto

It worked fine then stopped working not even a month later i returned it got a credit and reordered so ill update this review about it if everything is fine

The screen worked great for a few days and then became loose. As mentioned by others the screen is thick which I didn’t think was a problem. However, it started going black and then completely fell off after a week. The glue was not strong enough to hold the screen on at all I ordered the more expensive one from a different brand and it works way better. Don’t waste the money and just buy the more expensive one. Unless you want to have to replace it in a week.

This product will suffice to replace a screen, but there are some caveats.#1: This is LCD, not OLED like the original. This means that blacks are less intense and the colors less vibrant. While it is acceptable and not very noticeable, this should be pointed out. At least it is half the price of a proper OLED screen.#2 The LCD quality is not great, as it is apparent that the refresh rate on this screen is lower than the original screen. It is not very smooth when you are used to the original screen.#3: They cheaped out on the screen adhesive and it is likely that the phone’s water resistance will not be preserved. It’s way too thin.#4: The screen will always report as an unknown screen in iOS. There is not way to recalibrate this screen.Otherwise, if you just want add some life to an old cracked phone, this is acceptable.